Get the trouble codes read. That's ALWAYS your starting point
ABS light on TRAC off Stabilitrac Ricks Free Auto Repair Advice
SOURCE: no lights
check the park lamp relay and the body control module for possible causes. the body control module controls both systems.
SOURCE: 2005 chevy cobalt, car wont start ... check
disconecting the battery should reset the pcm. but you will need to find out what caused the problems.
SOURCE: 2005 Chevrolet Cobalt in "limp home mode" code 606
P0606 indicates Control module internal performance. GM is indicating of the replacement ECM. Once replacement is completed reprogramming the ecm is necessary. Locally a few auot parts stores can reflash the ECM.May want to check with a NAPA or Carquest for this otherwise dealer is probably the only option.
Notice: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
Reverse process for installation
SOURCE: remove and replace Alternator on 2005 chevrolet
All you really need to do is disconnect the cables directly attached to the alternator, release the tension on the serpentine belt, and remove the bolts holding the alternator on. to install a new on, just to the opposite. you might want to loosen the tension first if that makes it easier to disconnect the wire(s) from the alternator. should take about 1-2 hours tops for $100.
134 views
Usually answered in minutes!
×