There were two designs that year.
First design with M11 bolts:
1) Tighten to 22 Ft/lbs in sequence
2) turn 90 degrees in sequence
3) turn another 90 degrees in sequence
4) turn 50 degrees in sequence
Second design with M11 and M8 bolts
1) tighten all M11 to 22 ft/lbs in sequence
2) turn all M11 90 degrees in sequence
3) turn all M11 70 degrees in sequence
4) tighten M8 bolts to 22 ft/lbs in sequence
SOURCE: torque wrench settings
please understand there are a lot of items on a car that require torque settings every thing from the lug nuts to every engine bolt, and transbolt. please be more specific
SOURCE: I need to know the torque wrench settings for
The small bolts holding the caliper to the bracket are 20 ft/lbs
The larger bolts holding the bracket to the hub are 79 ft/lbs
SOURCE: torque specs on 2002 chevy
the bolts that hold it to the knuckle are 133 ft.lbs. and the axle nut is 155 ft. lbs.
SOURCE: What is the torque spes
For 2004 Chevrolet Truck Silverado 2500HD 4WD 6.0L SFI 8cyl, the intake manifold, throttle body, fuel injection rail, and fuel
injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
Intake manifold bolts. Tighten intake manifold bolts first pass in
sequence to 44 inch lbs. (5 Nm). Tighten intake manifold bolts final
pass in sequence to 89 inch lbs. (10 Nm).
Fig. Lower intake manifold bolt tightening sequence - 4.8L, 5.3L and 6.0L engines
Hope this helps.
89 views
Usually answered in minutes!
×