You may want to send this in for diagnostics and repair. Code U0001 High Speed CAN Communication Bus. This code should be related to the anti theft system. Without professional diagnostic equipment. The only thing you can do is disconnect the battery for 10 minutes and while disconnected, unplug connectors related to the Anti theft system. I can tell you that this system is sensitive to transmitting and receiving constant information. Connectors over time will collect dust. This dust can interrupt communications.
This link should help Service Manual2008 Aveo Diagnostic Trouble Code DTC U0001
SOURCE: 2008 Chevy Aveo CD Player Error 7
Hi i have a 2008 chevy aveo the dashes lights up but the radio stations wont whats wrong
SOURCE: Chevy aveo error codes. I have a check engine light on.code p2135
P2135 Throttle Position Sensor (TPS) Property Malfunction, remember this is not a car that is built by GM it is a Korean import.
SOURCE: How to fix p1345 obd code on 97 chevy 1500 5.7 Lt.
P1345 is "Crankshaft position sensor / Camshaft position sensor correlation"
Code P1345 determines if the distributor is installed incorrectly, or
if a mechanical malfunction is present in the engine. The light will
trigger when the engine is running and the camshaft sensor reference
pulse is not detected at a correct relative position with the crankshaft
pulse. Most likely causes for this Chevy check engine light code
include a faulty crankshaft position sensor, a wiring concern or an
improperly installed distributor. A quick check on the crankshaft sensor
is to monitor the RPM value with a scan tool while revving up the
engine. If the reading is close to twice the expected RPM, then the
sensor is likely faulty. There are other less likely concerns possible,
such as base engine or computer related issues, but these involve more
in depth testing. I hope this information is useful.
SOURCE: I have a 2009 Chevy Aveo saden 4d LT, the car idles and takes off roughly
idle rough take off rough could be intake leak,egr solenoid leaking,intake manifold could be leaking,check all vacuum hoses look for any disconnect.make fuel system been maintain, clean fuel injectors and replace air filter.replace spark plugs and wires.if check engine light does flash code scan for faulty idle air control valve it could cause rough idle and stalling.
510 views
Usually answered in minutes!
×