Cars & Trucks Logo

Related Topics:

R
Rick Posted on Jan 03, 2018
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Dodge Avenger 2013 - Horn honks once every time I physically open the drivers door? No warnings in message center and no indicator lights on in dash- could this be a low battery in key fob?

1 Answer

deton8 von Splosion

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Dodge Master 3,342 Answers
  • Posted on Jan 04, 2018
deton8 von Splosion
Dodge Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 27, 2010
Answers
3342
Questions
6
Helped
928866
Points
54123

YES - ABSOLUTELY....

Replacing the battery requires no special programming.

However
So long as you have at least two (2) programmed
keys (up to eight are supported) you are able to add
additional keys or REPROGRAM your RKE fobs
(remote keyless entry fobs) ... YOURSELF.

Check page 19 of your OWNERS MANUAL
( 519 pages: OR CLICK HERE )
Dodge Avenger 2013 Owner Manual Replacement Keys

Hope this helps


Carnac the Magnificent

5 Related Answers

Anonymous

  • 54 Answers
  • Posted on Jul 12, 2008

SOURCE: clio

the key has lost its code. open the doors manually and use the central locking button inside the car. hold it down and keep pressing your key fob. this should re code the key

Ad

Anonymous

  • 30 Answers
  • Posted on Mar 11, 2009

SOURCE: 2002 Ford Focus Doors lock with key fob, but horn does not honk

there are two seperate horns

sodeep

Sudeep Chatterjee

  • 3267 Answers
  • Posted on Oct 25, 2009

SOURCE: Kia Rio 1.5 diesel

The fob is infamous for its battery life. It gets drained so quickly that there happens to be a little later when the fob is very close to the door lock, ignition & unnecessary triggers the alarm due to low reception as the battery of the fobs discharges very fast, depending on the model, which has a certain virtual sheild(STARTRECK type) which is triggered by the fobs strength of the signal(radi waves).

Why not try a new set of batteries for your fob?? .................................sodeep

Anonymous

  • 1 Answer
  • Posted on Jan 14, 2010

SOURCE: how do you charge the key fob.. The message on the

The key fob does not get charged. Instead you replace the battery inside the Fob. if you look behind the fob it tells you what battery it needs for replacement. CR2032

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jun 27, 2012

SOURCE: 2000 tahoe horn honks when driver door is open with key. Keyless entry is not working.

(Inside the drivers door on the door latch is a switch called the door ajar micro switch, it is defective. With no signal from this switch the system triggers the alarm system. You must have this switch input checked, it can be the switch or the wiring to it that is defective.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2013 Ford Expedition Limited with factory remote start not working. When I hold down the key the system engages by honking once, it tries to start and then honks 3 times.

Sounds like one of the door ajar switches is not working. There is one on each door latch and you have to remove the door panel to get to them. The easiest way to diagnos it is to hook it up to a scanner and monitor the door ajar pids and see which one is not working.
0helpful
1answer

Was needing to locate horn relay to wire new horn button was needing to know of the four relays which is the one for the horn?

look in the owners manual under fuses it will show where the fuse box are located.There are probably 2 boxes one inside and 1 under the hood.Have someone honk the horn and start unplugging them.Most of the time they are marked.
0helpful
1answer

Locked keys I'm trunk of 2013 dodge avenger doors are locked is there a way to get into car

do you own a slim jim to open the drivers door? if not get ahold of a tow truck driver or a police officer as they have them with them or any auto parts store sells them, once in the car psh remote button for trunk or pull down rear seat back and you are in!
2helpful
1answer

Reset key fob

Unlock all doors, foot on brake, all doors closed. Cycle key quickly but carefully on-off appr 10 times until the car honks one time.

Do not turn the key far enough to start the car, just to the 'on' position so the dashboard lights up.

When the horn honks, open and close the driver's door, press any remote button and that's it.

Program another remote? Quickly open and close the driver's door again and push a button on the 2nd remote. That's it.

When you're done, remove the key and the horn should honk 3 times. You're all set.
Sometime it takes more than 10 on-offs to set program mode. Open/close the door, lock/unlock etc, wait 10 minutes, then try again
0helpful
2answers
0helpful
2answers

2003 ford explorer eddie bauer horn randomly honking

One honk means all doors are closed. Door ajar you have 2 honks telling you a door is open. My 03 Explorer has had the door ajar light on for awhile
0helpful
1answer

How do i manually release the rear door on a ssab 9-3 2003 as the door module has failed

Trunk Lock After Closing
--------------------------
Desc.: What happens to the trunk lock when closing it.

Settings:
Yes: Automatically lock Boot on closing
No: Boot can be reopened using micro switch button located on the trunk/boot

* Trunk Lock After Drive Off
----------------------------
Desc.: Should the trunk be locked at drive off or after 30 sec.?

Settings:
Yes: Trunk/Boot will automatically lock when vehicle increases speed
No: Trunk/Boot will remain closed, however will be in the unlocked
condition if No was selected in the previous option.

* Door & Trunk Unlock at Key Out
--------------------------------
Desc.: When the is removed from the center console should door/trunk
be unlocked?

Settings:
Yes: All Doors & Trunk/Boot will Unlock when the Key is removed from
the Ignition Switch If Driver frequently locked all Doors when
driving
this feature would be beneficial.
No: Doors and Boot will remain in the same condition as they were
prior
to Key removal

* TSL Locking Logic (Theft Security Locking/Deadlock)
-------------------
Settings:
TSL at first Press: Default Setting. All Doors will lock in Deadlock
Mode
TSL at Second Press: All Doors will lock in Deadlock mode at the second
press of the Remote.

* Lock /Unlock Acknowledge
--------------------------
Settings:
None : No acknowledge will be visible
Indicators: Indicators will blink as acknowledge

* Follow Me Home Function
-------------------------
Settings:
Tail Light: When selected Tail Lights will be illuminated
Back Up Light: When Selected Reverse Light will be activated


Tech 2 Body Exterior Lighting & Horn
====================================

* High Beam Follow me home Active Time
--------------------------------------
Desc.: Follow Me Home Active Time can be adjusted between 0- 10 minutes

Settings:
This Feature can be turned on or Off .Yes / No can be selected.
Low Beam Automatic / Low Beam also in Position 0 (light switch)
Yes / No
Follow Me Home Active Time
- Daytime Driving Lights can be activated

* Parking Lights
----------------

Settings:
Act as Lead Me To the Car Light.

* Park Light On Reminder
------------------------
Settings:
On / Off
If Ignition is turned Off and the parking lights are active, Driver will
be warned if set to on.

* Show Trailer Light Outage
Desc.: REC will detect blown trailer light and display on SID

Settings:
Yes or No

* Trailer Light / Fog Light off
-------------------------------

Settings:
Yes: Fog Light Rear will be disabled When Trailer is connected Yes
No

* Horn Lock Unlock Acknowledge
------------------------------
Settings:
On: Horn will honk when car is locked
Off: Horn will not honk if car is locked


Tech 2 Body Locking
===================

* Panic Alarm Activation (Vehicles fitted with /Alarm only)
-----------------------------------------------------------
- Panic Button / Locking Switch
Central Locking Switch Driver /Passenger

Settings:
- Panic Button on Remote and locking switch inside vehicle will
activate alarm
- Panic Button will activate Alarm only
- Locking Switch inside vehicle (driver /passenger will activate
alarm only
- No Panic Alarm function required.

* Unlock Logic
--------------
Settings:
All at first press : All Doors will open & Fuel Lid will unlock if the
Driver or Passenger Door Switch is activated
Driver Door & Fuel Lid at first press : Only the drivers Door will unlock
& Fuel Lid will unlock when door
switch is activated

* Remote unlocking One Press
----------------------------
Settings:
All at first press: All Doors will open & Fuel Lid will unlock if the
Remote is pressed
Driver door & Fuel Lid at first press: Only the drivers Door will unlock &
Fuel Lid will unlock when the Remote
is pressed
1helpful
1answer

I have a 1996 dodge avenger ES 2.5 and my horn wont stop honking, i replaced the fuse, the relay and the horn itself..... it still wont quit. Any ideas?

In most cases this problem is caused by the rotating ribbon circuit contact under the steering wheel having a broken filament, the part is known as a clock spring contact, u will need to properly disarm the airbag and remove the steering wheel to access the part. WARNING: Failure to disarm the airbag system can result in an unexpected Airbag deployment and possible serious personnel injury disconnect the battery 30 minutes prior to start of work
1helpful
1answer

I bought a new Keyless remote for a 2007 Forester from a Subaru Dealer to replace an original one that went bad after 2 years. I have followed the directions in the owner's manual to program it, but can't...

IMPREZA: 2005, 2006, 2007 and
FORESTER: 2005, 2006, 2007, 2008
Check for Immobilizer key on Forester XT models only.
information is always subject to change and correction imp05keylessremote1.jpg
new remote for 2005 Imprezas.
This is not the same remote as the 05 Legacy/Outback remote which also has truck/gate release on the front and a red panic button on the back.
Lock: press Lock button for 2 seconds or so to lock car, and arm optional security system. The car with chirp once and turn signals flash for locked, 5 short chirps and signal flashes if any door is not fully closed. The dome light goes on for 15 seconds and ignition key ring (if present) will light for 30 seconds when unlocked.
Unlock: press unlock one time for driver's door, press again within 5 seconds to unlock all doors inkling rear gate (wagon). The system does not open the trunk.
Panic mode: press and hold lock button for approx. 3-4 seconds to activate Panic mode. I panic model the horn honks and turn signals flash until either the lock or unlock button is pushed again.
Finder mode: Press lock button 3 times within 5 seconds to activate Vehicle Finder mode. The horn will honk once and the turn signals will flash 3 times
Distance: works within approx. 30 feet depending on battery strength, nearby concrete walls and etc.
Audible Chirp On-Off: the system will chirp when locked or unlocked. To turn OFF the chirps, unlock the door and then push both lock and unlock buttons at the exact same time for 2+ seconds. There will be 2 chirps indicating the the audible is off. To turn the chirp back on, repeat the process and the system will chirp one time when it is back on.
Battery: as the battery ages it will only work as you get closer to the car. When a battery is replaced, the transmitter must be re-synchronized with the Keyless control unit. To synchronize, press the lock or unlock button 6 times.
Programming: 4 codes may be programmed.
Sit in driver's seat and unlock all doors. Open and close the driver's door
Turn the ignition key from LOCK to ON position 10 times within 15 seconds. Be sure to stop at both lock and on. The horn will HONK once to indicate transmitter programming mode is activated. Leave key in LOCK position and don't remove it from ignition.
You now have 45 seconds to complete the programming as below.
Open and close driver's door again.
Push either lock or unlock button on the remote you want to program. The horn will honk 2 times when successful.
To continue and program other remotes at the same time: open and close the driver's door and push lock or unlock on the remote. The driver's door must be opened and closed between each remote you want to program.
Done programming? remove the key from the ignition and the horn will honk 3 times.
DELETE old codes? Reprogram 4 times, it will overwrite old codes.
Alarm Security System: optional on all models. When locked there is one chirp (can be turned off, see above), the turn signals will flash and the red 'security' light will start to flash once every 2 seconds except for STi which flashes twice every 2 seconds.
There will be 5 chirps if a door, hood, and trunk or gate is not fully closed
You can also arm the system by using the power lock button on the driver or passenger door as you get out of the car and then closing the door behind you.
Disarm the system: push unlock for 2 seconds
Lost remote, alarm activated? When you can't use a remote to turn off the system: open the door with a key or try to start the car and the horn will start to honk. Turn the key on-off 3 times within 5 seconds and the alarm will go off and you can start the car. It's simple!
VALET mode: To set valet mode or just to disable the security alarm system: 1. unlock all doors 2. physically open the driver's door 3. hold the UNLOCK button on remote for 2+ seconds. The red 'security' light will then flash 2 times a second until the car is turned on.
System has been Tripped (except for STi): if you unlock the door with the remote and it chirps the signal light flash 4 times, the system has been triggered;
Identification mode: To find out what happened and why the system was triggered:
Open and drivers door, leave it open. Turn ignition key from LOCK to ON 2 times and then leave in LOCK position.
Tripped code: 1 security light flash: a door has been opened, 3 flashes when the impact sensor was triggered, 4 flashes when the ignition was messed with or battery disconnected
0helpful
1answer

Door locks are shorted out in the open position and the horn is shorted out in the honk position and they are draining the battery. i had to pull the large accesory fuse in the power distribution center to...

You possibly have a bad switch. The one in the driver's door has 6 switches on it. Unplug it to see it your problems stop with the door. Your horn relay is shorted, replace it to stop the honking. Could also be the switch plate is in the short position. Unplug your horn, under front driver's side. Pull black splash guard behind/under front driver's bumper to access it. Unplug wire from horn. Relay should be under driver's side dash. Take off knee guard screws and you should see it in there. Unplug/replace it.
Not finding what you are looking for?

981 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...