Cars & Trucks Logo

Related Topics:

Jeremiah Hurst Posted on May 18, 2017

How can I start my 2001 chrysler voyager without my key fob

5 Related Answers

A

Anonymous

  • Posted on Oct 27, 2008

SOURCE: Second key and fob for 2005 Chrysler Sebring Convertible

go to your dealer. It will cost you an arm and a leg for the key and fob and also to program it.

Ad

Anonymous

  • 150 Answers
  • Posted on Apr 24, 2009

SOURCE: Programming a key fob

you will need the dealership diagnostic tool to program the remote

Anonymous

  • 314 Answers
  • Posted on Jun 09, 2009

SOURCE: 2001 Chrysler Voyager - A/C won't engage

This definately sounds like the clutch cycling switch or the low pressure switch is bad. You just simply evacuate the system, screw off the old and screw on the new and then evacuate and recharge the system. This should get you fixed. You might also want to check and make sure that you have enough refirgerant in the system. If there is not enough then this switch will not allow power to flow to the clutch to prevent any damage to the compressor from there not being enough oil in the system.

Robert Debison

  • 412 Answers
  • Posted on Jun 12, 2009

SOURCE: 2005 Chrysler Grand Voyager. Central locking

the body control module may need a software update..check with your local dealer

Anonymous

  • 3640 Answers
  • Posted on Nov 12, 2009

SOURCE: chrysler voyager 2001 error code p1281

this code is--manufacturer control fuel air metering

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to program a new keyless fob with an existing working fob on a 2008 Chrysler 300 LX

  1. How do I program my Dodge key fob without working one?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px; transform: rotateZ(-180deg);">
    How do you program a key fob without original?
    1. Replace the batteries inside the key fobs.
    2. Get inside the car.
    3. Turn on the ignition.
    4. Press the lock button on the remote key.
    5. Listen for a Lock Sound.
    6. Programming additional remotes.
    7. Turn off the ignition.
    8. Step out from your car and test the result. How to program my Chrysler key fob without working one Turn the ignition key to Accessory or "ACC". Turn the ignition key off again, and the door locks will cycle once. Press any button on the key fob 3 times in a row to program it. The door locks will cycle once again once programming is complete. https://northcoastkeyless.com/2008-chrysler-300-keyless-entry-remote-fob-programming-instructions/ the instructions to [program a fob are that you need two or need to have dealer or approved locksmith
0helpful
1answer

What does front body module do

body module is for anti theft mostly,use your key fob to unlock your doors then put your key in and unlock then start
0helpful
2answers

My 2001 chrysler voyager keeps cutting out

Check fuel pressure. on the fuel line you will see this tire air gauge like, turn key without car being on. then see if you have pressure. gas will come out, but make sure it's with pressure. If not that, check feul filters. May be cloged.
0helpful
1answer

2001 Chrysler Voyager will not start

does it crank. if so then the starter is good. when you turn the key but not start it do you hear the fuel pump running. do you know if you have spark to the spark plugs. is there any codes
0helpful
1answer

Trouble starting 2001 Chrysler Voyager in the mornings

It very much sounds like your fuel pump is getting weak or the fuel pressure regulator is going bad.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

3helpful
1answer

MY VOYAGER IMMOBILISER SEEMS TO HAVE KICKED IN CANT GET IT STARTED IS THERE AN ELECTRICAL RESET SWITCH ON THE VEHICLE? TRIED THE SECOND KEY FOB BUT NO JOY DOES ANYBODY HAVE ANY IDEAS?

Its likely to be the 21 pin plug behind the heater control panel. Remove the long plastic strip under the control panel (prise of gently, held on by 2 clips) remove 2 screws behind this and 2 screws above on panel. The whole lot should easily come away. There will be 3 plugs, remove all three and try to start the car. If it starts your problem would be the earth. Hope it helps.
0helpful
1answer

Changed battery alarm won't turn off engine starts fob opens doors

if it is a aftermarket alarm, get rid of the alarm, or unlock and lock door w/ key am alarms are a problem when they go awry
8helpful
1answer

I have a grand voyager limited diesel. The central locking has stopped working, both via the key fobs and inside the car.However, the key fob still opens the side doors as well as the boot. Same problem...

dont go through all the hassles of removing the door trim just take the terminal off the battery for about a minute then reconect again worked on mine good luck
Not finding what you are looking for?

59 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...