SOURCE: 2005 Chevy Cobalt, how do you reset a fault code?
Your car has a OBD2 hook up under the dash somewhere on the drivers side, You have to have a computer to hook up to that ODB plug and reset it, If you live near a Autozone they will clear the code for you for free, One other thing you try is disconnecting your battery for about 30 mins, that works on alot cars to reset the check light.
SOURCE: my 2005 chevy cobalt factory radio is locked
There are only 2 things you can try to fix this yourself: turn off the engine and open the driver side door (to turn the radio off). Wait 5 minutes, start your car.
If that does not solve it, turn off your engine, disconnect the car battery, wait about 5 minutes. Reconnect the battery (negative pole first - black connector) and try your radio again.
If neither one of these two fix your problem, I am afraid only a GM service center or dealership can fix the problem. The Cobalt is notorious for all kinds of electrical issues.
Thanks for using the fixya forums!
SOURCE: no lights
check the park lamp relay and the body control module for possible causes. the body control module controls both systems.
SOURCE: why does reduce engine power light comes on chevy
That is a hard problem to pin point without knowing what codes the computer has stored. It can be any number or sensors or engine problems.
You can go to most auto parts stores and they will pull the codes for you for free.
SOURCE: 2005 chevy cobalt 37.000 miles engine light on.
CODE PO449 - EVAP VENT SOLENOID CONTROL CIRCUIT MALFUNCTION.SOUND LIKE EVAP VENT SOLENOID HAS FAILED OR A BLOWN EVAP VENT SOLENOID FUSE.
Testimonial: "Thank you for the help will check it out"
163 views
Usually answered in minutes!
×