How to reset the check engine light on 2013 dodge avenger without a obd2

SOURCE: 98 dodge avenger transmission problem

codes will verify if it needs to be pulled out. More than likely it will as the electronics are rarely the problem. The computer senses a indifference in the ratio between the sensors so it locks it in limp mode - 2nd gear.

SOURCE: 2008 Dodge Avenger: How to get codes when check

Need to use a code reader to read and reset check engine light.

SOURCE: Check engine light came on. OBD2 gave me 5

Take it to autozone. If you live in USA. They have a thing that checks and they will tell you exactly what the codes mean.

SOURCE: check engine light reset

usaly You use a OBD 2 Scan tool if you do not have one you might want to disconect battery for a minute then reconect the battery how ever keep in mind if you do not fix the switch that cause the *eng light* to come on it will return when you start the car up again,Hope this helps ,John

SOURCE: I have a 2008 Dodge Avenger and the check engine

sounds like your have a misfire in one of your cylinders...a flashing check engine light with engine running rough. Check your sparkplugs and wires. you should have the code scanned.

Testimonial: "Sweet"