Use scan tool to erase codes, or have parts store do this.
SOURCE: 98 dodge avenger transmission problem
codes will verify if it needs to be pulled out. More than likely it will as the electronics are rarely the problem. The computer senses a indifference in the ratio between the sensors so it locks it in limp mode - 2nd gear.
SOURCE: 2008 Dodge Avenger: How to get codes when check
Need to use a code reader to read and reset check engine light.
SOURCE: check engine light reset
usaly You use a OBD 2 Scan tool if you do not have one you might want to disconect battery for a minute then reconect the battery how ever keep in mind if you do not fix the switch that cause the *eng light* to come on it will return when you start the car up again,Hope this helps ,John
SOURCE: I have a 2008 Dodge Avenger and the check engine
sounds like your have a misfire in one of your cylinders...a flashing check engine light with engine running rough. Check your sparkplugs and wires. you should have the code scanned.
Testimonial: "Sweet"
SOURCE: reset check engine light
The lught can be reset with an OBDII scanner. Most auto parts places like Advance or Autozone will read and clear the code for free.
890 views
Usually answered in minutes!
×