87 S10
SOURCE: My AC unit locked up and broke the fan belt on 87
Good chance that will work, but I would take a good look at route belt will take, in order to by-pass compressor, just to be sure it won't rub or hit anywhere else when installed and running, so you need a little room for flexing of belt as well. Take a string or similar, and measure around current route of pulleys including AC, then do the same, by-passing AC, and subtract the difference between by-passed route, from old route to get a rough idea of what length of new belt should be. The actual part number of the belt usually has the length in it, so the parts guy can tell you or you can figure out if the new one sounds like right length. Hope that didn't mix you up.
SOURCE: where is the fuel relay located and the fuse on a
They are all the same part number replacement relays so you can swap them around to see if one is bad
The fuel pump relay will not work the fuel pump intitally for the oil pressure sensor has a 3rd wire running to the fuel pump. When you set the key to the ON position the oil sensors 3rd wires circuit will send 12 volts to the fuel pump to prime the fuel up the the injectors. You can hear it running for 5 seconds with the ignition key set to the ON position. DO NOT START the engine when testing for the sound of the fuel pump/ If no sound of the pump is heard, replace the oil sensor first
SOURCE: 1996 s10 pickup ac relay
it should be in the fuse box in engine compartment or under the dash, so hope were right on with the answer. Goos luck
135 views
Usually answered in minutes!
×