Rear brake on 2002 hyundia accent

Hi from uk after supporting car on stand or blocks ? remove wheel then you will see x head screwsx2 remove screws then release handbrake drum should now rotate freely you may need to lightly but firmly tap the drum off the hub if you have an old vac ? use it to vac the dust from shoes and drum ? if your shoes are ok ? then make sure the auto adjuster is free and clean? if your h/brake travel is high and the reason for checking brakes? then notch up auto adjuster a couple of clicks at atime whilst keep trying the drum fits so the shoes are just enabling rotation of drum by hand then press b/pedal a cople of times to centralise shoes to drum ? if drum still rotates freely with no binding on shoes ? then re assemble carry out same proceedure on other side ? do not adjust brake cable! unless you do adjustment as above you may/will find your h/brake is better /less travel ? also your foot brake will feel better and less travel ? hope this helps you but if you req further info/assistance by all means come back to board best wishes from lancashire uk