Question about Volkswagen Golf
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees
Posted on Jul 26, 2009
BMW cylinder torque setting all models
According to my service manual as follows.
Cyl head to engine block (torx e12 M10 bolts)
Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees
Cyl head to lower timing chain cover 10nm (89in – lb)
The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.
Posted on Aug 29, 2009
Tips for a great answer:
Oct 27, 2016 | Volkswagen Golf Cars & Trucks
Dec 30, 2015 | Cars & Trucks
Dec 23, 2015 | 2006 Volkswagen Golf GTI
May 17, 2011 | 2000 Volkswagen Golf
Mar 23, 2011 | Volkswagen Golf Cars & Trucks
Mar 02, 2011 | 1989 Volkswagen Golf
May 10, 2010 | 1986 Volkswagen Golf
Sep 15, 2009 | 2003 Volkswagen Golf
Apr 09, 2009 | 1996 Volkswagen Golf
Jan 04, 2020 | Volkswagen Cars & Trucks
712 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: