This is a 2.3 quad4,car ran fine when i shut it off
now it has no spark,ive changed the crank sencor,the coil pack,the ecm modual,the oil pressure sencor,and still no spark,it doesnt have a cam sencor
im stummped on what too check next
You said you changed the ecm module, is that the ecm or the ignition module. Do you have access to a scanner to check cranking rpm? That way you can test the new crank sensor and the wiring and the ignition module.
How are you checking for spark? The easiest way to check spark on a quad 4 is to lay the ignition hat up on the wipers and run plug wires from the coil adapter towers to the plugs. Then you can check one at a time. Don't forget to run a jumper wire to the hat to ground it or it will shock you and quad 4's have enough voltage to kill you.
×
CAM SENCER
555 views
Usually answered in minutes!
it has no cam sencor according too the book or that io can find
if it does have on wheres it at?
×