Hi i have a renault cleo and the intermittant wiper on the front doesn't work 1 and 2 speeds are working fine. when the vehicle stops at a junction the wipers stop, i think this is working as it should. The rear wiper is working on intermittant as it should. i think it maybe the intermittant wipe relay but don,t know were this is have you guys any idear of the problem or where the front intermittant relay is
Thanks steve
SOURCE: Windscreen wipers stagger on the windscreen and make a screeching
clean the screen with metho and dertergent all it is is road grime
SOURCE: rear wiper hangs loose, wont wipe
Sounds like the spring has broken in the wiper arm. If you pull the cover off of the base of the wiper arm there will be a screw. Remove the screw and pull straight out on the base of the arm. That will release it from the actuator. You should be able to pick one up at a parts house for about $20 to $40 dollars or you could shop a salvage yard for about $10. Hope this helps. Good luck. Please re-post with updates. Thanks cj2176.
SOURCE: Rain Sensor wipers Renault Megane
Either the replacement sensor the windscreen technician should have fitted isnt connected properly to the glass or it has developed an intermittant fault - quite common with Renaults especially megane scenics and grand scenics....
SOURCE: Wipers won't stop wiping.
Sounds like your intermittent wiper circuit is defective. Normally the intermittent feature is engaged by one of the functions on the multi-function switch (usually on the steering column). The circuit of the intermittent wiper periodically activates a relay that closes across the "Wiper On" switch. Your intermittent wiper circuit is likely defective and holding its relay closed (or the relay is stuck closed), thereby keeping the wipers on. Note: The wiper motor has an internal switch that opens when the wipers are in the park position and that is designerd to stop the wipers in the park position. When you turn on the wipers (or the intermittent relay is closed), the motor's internal switch is shunted such that the wiper does not stop at the park point of the cycle.
SOURCE: 2001 renault megane classic - wipers not working
if the fuse is fine then get a voltmeter and test the voltage reading to the wiper's electric motor.If you get a reading then check the motor itself as it may be faulty.
Testimonial: "thanks.... appreciate your help "
267 views
Usually answered in minutes!
×