Block heater cord on 2005 focus

Block heaters are not a factory options. They are installed as an aftermarket option after the vehicle is purchased. If you have not installed a block heater than there is likely not one in the vehicle. If one was installed it would be in one of the frost plugs in the side of the block. Since it is an aftermarket install the cord could be anywhere or missing. And experienced automotive professional would be able to find it if it was installed the next time you where in for service.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Chances is you don't have one if it's not able to be found or is in not in the manual

we cant guess this. what is the question:

1. its lost, cord end now ripped off?
2. you want to add one. (ford sells it, buy it and and read box instructions;
3. you bought a car, and was just wondering , not easy this is because there are so many heaters, why not ask a pro car tech to look for you? it can be freeze plug heaters, , mag heaters, in line water cooling heaters (my fav) and others.

ask any mech, to just look, why not?

YOU MUST HAVE HAD A SHORT IN THE BLOCK HEATER OR THE 115 VOLTS TO THE HEATER MUST HAVE BEING SHORTING ON GROUND SOMEWHERE.

It is on the side of the block you will need to jack the car up and look for the freeze plug that has the block heated connected to it.

It is almost on the top of the engine at the back when standing against the front bumper. Use a small mirror and run it across the back of the engine, you will see a small brass rectangular piece with 2 prongs inside it. That is where you plug your cord into

your heater core is plugged with dirt thats common on ford focus

Yes most of them havea block heater lots of times from the factory they hide the cord. Any way it should be on the right or left side of the engine block

The block heater is already installed in your 6.0. The cord may not be there as it is an option in some states and standard equipment in others. The best way to see if your cord is there is to crawl under and look up by the # 4 cyl and you will either see 2 prongs sticking out for the cord or you will see the cord. The cord should end in the front bumper behind where the front tag would be. If you dont have the cord Id suggest getting it off ebay as it should be cheaper than the dealer. Hope this helps.