1999 Chrysler Town & Country - Limited
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the bcm.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the bcm to the jb. Slide the bcm downward to disengage guide studs on jb from channels on bcm mounting bracket
Remove bcm from jb.
Very important!!...there are three screws holding the bcm to the jb. You'll see the first two on one side of the bcm in plain sight. The third screw is hiding way up on the opposite side towards the back of the bcm. If you look up the length of the bcm from the "two plugs" end towards the rear of the bcm, you should see it. You may need to lie on your back with a flashlight and look up to even see it and will need a longer screw driver. This third screw eluded me and caused me to eventually "rip" the bcm out and off the junction block.
×
SOURCE: where is the body control module located on a 1997 town & country
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
8,340 views
Usually answered in minutes!
head light out I was told I needed a front control module and now a brake light is out can it be related
location of the tcm and the ecm 2007 chrysler 300
Can you tell me where it is located
×