Need to know the factory specs for torque for tie rod ends for chrysler 300 2007

• Axle Shaft nut - 177 ft-lb
• Hub and bearing assembly to steering knuckle bolts - 133 ft-lb

2003 chevy silverado 1500 4.3 v6. Changing steering rack and

https://www.justanswer.com > ... > Chevrolet Repair
Jan 11, 2021 - Below are the torque specs you requested: Steering Rack-to-frame mounting bolts: 136 lb. ft. Outer tie rod nut: 37 lb. ft. Outer tie rod ...
1 answer · 1 vote: Coupler clamp bolt to the intermediate shaft: 33 ft. lb.

• 
  

  Torque specs for tie rod end castle nuts - JustAnswer

  https://www.justanswer.com > chevy > 2p3g8-torque-sp...
  Oct 24, 2009 - Tighten the clamp nuts 18 ft. lbs. (25 Nm) (except C3HD). On C3HD models, tighten the clamp nuts to 65 ft. lbs. (88 Nm.

People also ask

27 ft lbs

https://www.instructables.com/Replacing-an-Outside-Tie-Rod-on-a-Honda-CRV/

For the lock nut at the rack or for the tie rod end to steering knuckle?

Tighten it up using 2 spanners as tight as you can .

The tie rod end adjusting nut, 54 ft lb or 74 Nm
The tie rod end ball joint nut, 36 ft lb or 49 Nm

Does this include the outer tie rod nut also to be 45lbs foot torque?

Here are the tie rod end nut torque specs:
• Lower Control Arms - (Front and Rear bolt) 129 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Upper Control Arms - (Front and Rear bolt) 140 ft-lbs x2 and (Knuckle Stud) 37 ft-lbs
• Inner Tie Rods - 81 ft-lbs
• Outer Tie Rods - (Knuckle Stud) Tie Rod nut 44 ft-lbs and jam nut 55 ft-lbs
• Stabilizer Links - 17 ft-lbs
• Rear Shocks - Lower and Upper 85 ft-lbs
• Front Shocks - Module Bolt x2 37 ft-lbs, Module nut x3 37 ft-lbs and Stud nut 37 ft-lbs

CAMBER BOLT ON THE TIE ROD ENDS.YOU NEED A HAYNES REPAIR MANUAL TO GET THE TORQUE SPECS.YOU PROBABLY NEED WHEEL ALIGNMENT WHENEVER YOU REMOVE TIE ROD ENDS OR UPPER AND LOWER BALL JOINTS IT WILL ALTER WHEEL ALIGNMENT.

ok here we go tie rod=55 ft lbs axel nut= 180 ft lbs strut bolts= 65 ft lbs plus 90 degrees

45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut