A hunting truck we recently purchased will not engage the 4wheel drive. When put in 4 low or 4 high neither make the front wheels pull. It doesnt appear to have any hubs to be locked externally just the shifters on the floor. the lady we bought it from is selling it cause her husband died and she doesnt need it. I asked her but she don't know and I sure don't know. Can anyone help?
SOURCE: The four wheel drive quit working while driving in
Your truck should have a solenoid attached to the front axel (more so to the right side). Unplug the solenoid and probe the harness. It should be two wires if not tell me. But it should have twelve volts on one and ground on the other (with the 4wd in-gauged) If that is fine remove the solenoid and see if it actuates when put it into 2wd and 4wd. If that checks out then the problem is either somewhere inside the front axel or maybe the transfer case. But the way you described it I would start with the front axel.
709 views
Usually answered in minutes!
×