SOURCE: Bogging while heavy accelration.
vacuum advance working ? do manuel check with cap and rotor button off and see if it's moving. chris
SOURCE: 95 Chevy C-1500 runs rough at idle and during accelleration
Check the vacuum line to the fuel pressure regulator and check to see if the fuel pressure regulator has gone bad. Give the throttle body a good cleaning and the injectors too. Do not use carb cleaner, it's to corrosive for the gaskets used in the throttle body. The other thing too that would cause this is a stuck or bad EGR valve, Try cleaning the EGR valve too since your cleaning the throttle body. Good luck and keep me posted.
SOURCE: 1987 chevy s10 2.5l tbi will not start. changed
That eliminates the crankshaft and camshaft position sensors. Have you checked the fuel injector itself for an open winding or stuck valve plunger? There should not be a steady 12 volts to the injector--if good injector, it would be spraying fuel steadily into the throttle body. But at least the engine should try to run if poorly. Take the injector out, dry it off with air, and intermittently apply 12 volts to one terminal while grounding the other. You should hear a click from inside every time you touch 12 volts. If not, replace it. If it does, it may be plugged with debris. Try blowing through it in reverse with compressed air.
SOURCE: 1987 chevy S10 engine idle problem
relace the throtle air idle valve.The temp switch will allso cause this problem.
SOURCE: Starts and dies on acceleration then will not run
try pouring some neat petrol into manifold and if it fires we can go from their .
491 views
Usually answered in minutes!
×