20 Most Recent
1998 Ford Expedition Questions & Answers
When my 1998 expedition is
it is not a vacuum hose, i have the same problem. you need to change the oil and oil filter, then spark pugs and ignition coils and wires. and then finally the fuel injector connections. hope this helps:)
8/4/2021 1:58:01 PM •
1998 Ford...
•
Answered
on Aug 04, 2021
Cost of replacing head gasket
You would do both sides
Have heads checked for cracks
and pressure tested
On a 12 year old head,I would do
the valves etc
$2000.00 or more,if you
pay someone and not do yourself
2/21/2021 8:59:21 PM •
1998 Ford...
•
Answered
on Feb 21, 2021
I need to know how to change bushings on 98 ford
Real vague. I will assume that the noise is the sway bar frame bushings. On a bump they can sound like a large hammer hitting the frame. If I am correct, there is no trick. They are not loaded, no pressure on them. The sway links are not loud. Control arm bushings squeak, not clunk, due to the fact that they are always loaded.
9/24/2019 8:03:12 PM •
1998 Ford...
•
Answered
on Sep 24, 2019
My 98 ford expedition is leaking brake fluid
You must make sure that (1)the line is tight but not over ightened if over ightened the flare has cracked and must be replaced (2)be sure you are flaring the tubing correctly that the tubing is sitting properly in the flaring block and that your are cutting the tubing evenly (3)inspect the fitting on the master cylinder and that the new line fitting is// the proper size////metric or sae/////and the master cylinder fitting is not cracked===== also the brass block is a union for both rear wheels you will see the other lines coming out to each wheel unless it' up front then that is a proportional valve ok but I think you have either a cracked line or fitting from over tightening or you are trying to mate an sae fitting with a metric one or improper flaring and crooked tube cutting good luck stephen
3/7/2018 6:14:51 PM •
1998 Ford...
•
Answered
on Mar 07, 2018
All of my power windows
Unfortunately, I have the same issue in my 2003 Ford F350. It is either the module or there's a relay that is not in the wiring system diagram believe it or not because underneath the dash on the driver side hidden away of course and is very difficult to get to.
2/5/2018 5:41:13 AM •
1998 Ford...
•
Answered
on Feb 05, 2018
Not finding what you are looking for?