20 Most Recent
2005 Chevrolet Cobalt - Page 4 Questions & Answers
Where is location of shift solenoid a located on 05 cobalt?
The shift solenoid valves are two identical, electronic exhaust valves that control upshifts and downshifts in all forward gear ranges. These valves are normally open. These shift solenoid valves work together in a combination of ON and OFF sequences in order to control the positions of the 1-2, 2-3, and 3-4 shift valve trains. The TCM monitors numerous inputs to determine the appropriate solenoid state combination and transmission gear for the vehicle operating conditions.
Remove the transmission side cover. Refer to Control Valve Body Cover Replacement . Remove the 1-2 shift solenoid retainer clip (304), the 1-2 shift solenoid (305) with O-ring (303), the 1-2 shift valve (302), and the 1-2 shift valve spring (301).
Remove the PNP switch. Refer to Park/Neutral Position Switch Replacement . Remove the transmission upper side cover bolts. Install the engine support fixture. Refer to Engine Support Fixture in Engine Mechanical. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the left front tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels. Remove the left inner fender liner. Refer to Front Fender Liner Replacement in Body Front End. Remove the wheel drive shaft from the transmission. Refer to Wheel Drive Shaft Replacement in Wheel Drive Shafts. Remove the power steering gear mounting bolts. Refer to Steering Gear Replacement in Power Steering. Remove the frame. Refer to Frame Replacement in Frame and Underbody.
This is a tough repair an needs special tools to do it . your best bet is take it to AAMCO
Not finding what you are looking for?