The check power train light will come on when the computer sees a problem with performance, the code you got was cam sensor,You may have a bad cam sensor but testing will need to be done to make sure, there may be another problem causing cam code.i would start with checking wiring to cam sensor and see what the noise is, may have bad crank pulley,

Read full answer

8/13/2012 5:56:05 AM • 2005 Chevrolet... • Answered on Aug 13, 2012

0helpful

1answer

I have a 98 LTZ lumina Chevrolet with 235.0000 miles...I was told I need an AC compressor because it makes a whining sound, but I have no ac anyway.. is it worth getting another compressor? Thanks for

Only if YOU REALLY want it. VERY expensive!

Read full answer

1/6/2021 8:14:47 AM • Chevrolet Lumina... • Answered on Jan 06, 2021

tip

HOW TO CHOOSE AN AUTO REPAIR SHOP

mcdevito75 here, Ever since the invention of the AUTOMOBILE, repair shops have been competing for your BUISNESS, whether it"s a SECIALTY SHOP designed on a specific part of the AUTOMOBILE or the GENERAL REPAIR SHOP designed for your AUTO"s all around needs, CHOOSEING one of these REPAIR SHOPs to SERVICE your AUTO takes a liitle work, as the saying goes, IT"s NOT WHAT YOU KNOW,------ IT"S WHO YOU KNOW. ------ This is especially true when it comes to your CAR / SUV, up-keep and service, even if you do all, your own work, you still need an AUTO REPAIR SHOP IN YOUR AREA for STATE INSPECTION, OIL CHANGES, (you need a shop to recycle your old oil) WORK THAT REQUIRES SPECIAL TOOLS AND ABOVE ALL FOR "EMERGENCIES". ----- Here"s HOW TO CHOOSE AN AUTO REPAIR SHOP FOR YOUR CARs / SUVs SERVICEING NEEDS. ------- Look for a 1--2 or 3 man Auto Repair Shop not too far from where you live, (walking distance, in case you have to leave your car / suv) I find these smaller auto repair shops just as friendly, and knowledgeable as the larger, auto repair shop chains and with a HUGE differece, ----- They could "CHARGE LESS MONEY". ----- Shop your area, stop in and say hello, (when they don"t seem to be too busy) ask a question about your CAR / SUV that you know thw answer to, ask for a baseball park figure on a specific repair job, (Front Brakes, Standard Tune up etc.) look for them to be FRIENDLY and HELPFULL, compare prices of a few repair shops in your area, ----- One sure sign of a GOOD SMALLER AUTO REPAIR SHOP, is their ability to do your STATES ANNUAL INSPECTION, It shows this smaller repair shop is Licenced and established, you"ll have your CAR / SUV serviced by PRO"s and you"ll SAVE MONEY TO BOOT.

Read full tip

on Dec 06, 2019 • Chevrolet Lumina Cars & Trucks

0helpful

1answer

Vacuum hose diagr

You didn't mention for what system (A/C. Cruise Control etc) so this is for the emissions/powertrain managment.

Read full answer

11/6/2019 10:31:14 PM • Chevrolet Lumina... • Answered on Nov 06, 2019

0helpful

1answer

Hi im having a 2006 chevrolet lumina v6 alloytec aka holden commodore vz im trying to fix after market push start button can any one help me with the wiring diagram of ignition switch?

2006 Chevy isn't as much a car as a computer-on-wheels and it isn't advisable to change the original wiring or equipment in any way because the electronics can soon become seriously upset. Mostly switches on such vehicles merely send signals to a computer requesting it commands the lights, heater, wipers to switch on. This usually applies also to the starter switch. My advice is to return the vehicle to original before trouble tracing.

Read full answer

9/12/2019 9:00:47 PM • Chevrolet Lumina... • Answered on Sep 12, 2019

0helpful

1answer

Where is the charging port located on 1991 chevy lumnia3.1

Look on the left/drivers side towards the air cleaner housing & battery, under the air cleaner housing to throttle body duct hose, between the cruise control solenoid and the battery...... the Accumulator/Drier is located under the air cleaner housing mount in front/next to the battery.

Read full answer

6/10/2019 2:59:05 AM • Chevrolet Lumina... • Answered on Jun 10, 2019

0helpful

1answer

I have Chevy lumina and is giving me this code P0035. Will someone help me

Where did you get the code? If the person running diagnostics can't tell you you wasted your time. take it to Auto Zone They will check it free and give printed summary of parts that may be replaced or inspected.with explanation and parts that could be bad. All Codes aware OBD 2 and are available on line for free. Just goggle code P0035 for answers, works every time.. Anyone can buy a $29.00 scanner but does not mean they know what means

Read full answer

6/7/2019 6:26:43 PM • Chevrolet Lumina... • Answered on Jun 07, 2019

0helpful

1answer

Where is the sensor circuit low bank 2 sensor 2 On 2000 Chevy lumina

back of engine on the exaust after the cat

Read full answer

6/6/2019 7:56:53 PM • Chevrolet Lumina... • Answered on Jun 06, 2019

0helpful

1answer

Was there any 1996 Chevy lumina

Yes, Chevy built the Lumina in 1996, got one in the driveway now.

Read full answer

3/13/2019 1:57:25 AM • Chevrolet Lumina... • Answered on Mar 13, 2019

0helpful

1answer

What is Firing order and coil pack number sequence for 1994 Chevy Lumina w/3.1L V6?

http://ricksfreeautorepairadvice.com/3-1-v-6-vin-t-firing-order/

Read full answer

2/12/2019 7:26:47 PM • Chevrolet Lumina... • Answered on Feb 12, 2019

0helpful

1answer

Have a 1990 Chevy Lumina that we replace the starter on and it would turn over a couple times drove it and then we went to drive it again it would not start and made a loud noise took it out took it back to O'Reilly to have the starter tested and starters are right put it back in did the same thing started a couple times and then tried to start it the third time and it made the same noise the noise sounds like a wheezing noise whining loud squeal

hi, sounds like you have a bendix gear going out. take the starter back and get another one and replace the bad one. make sure that all the battery cables are tight and clean first.

Read full answer

1/19/2019 7:24:32 PM • Chevrolet Lumina... • Answered on Jan 19, 2019

0helpful

1answer

How do you tip forward the back seat of a 1994 chevy lumina

In the middle of the seat cushions in the back of the seat there is a little loop, pull that loop forward and that will have the seat's bottom pulled down to the floor, against the back of the front seats. Next simply apply a lil muscle to the back of the back seats and the seats should fold down nicely into the open space. Be sure to remove the headrests so the seat will fold all the way down. If this does not work try to refer to the owner's manual: https://my.chevrolet.com/content/dam/gmownercenter/gmna/dynamic/manuals/1994/chevrolet/lumina/1994_chevrolet_lumina_owners.pdf

Read full answer

10/22/2018 10:05:53 PM • Chevrolet Lumina... • Answered on Oct 22, 2018

0helpful

3answers

What is the exact location

The manual states it is in the inlet line between the high side port and the evaporator.(which is exactly where all orifice tubes are on all cars so? I know. Nice description.) It is in the connection right above the high side port. So after the port a few inches toward the firewall. If you don't know what the high side port is, it is the larger port and red cap.