20 Most Recent 2012 Buick Verano Questions & Answers

Contact on star www.onstar.con

That's too big of a job for a step by step to be typed in here. I suggest you get hold of a Chilton's manual for those instructions. It will have the torque values and tightening sequence for the bolts.

Most door panels are held to the door with a large 'nail'. You need to get a wide flat blade between the door & panel and gently pry until it pops a nail out. You need to work your way around the bottom and up the sides. Don't forget to remove the armrest (should be some screw covers, then the screws themselves.

if you look on the drivers side of the engine down behind where the top rad hose is connected, its about 4 inches behind the hose toward the windshield. You should find a black plastic looking cap with a nut shape on the top of it. Bingo... thats the oil filter.

Remove the glove box from the instrument panel. Behind it is an access door. Remove the cover and the old filter, put in the new filter. Replace cover and glove box.