Chevrolet Cars & Trucks - Page 7 - Answered Questions & Fixed Issues

0helpful
1answer

Vehicle pulls hard to Right

limited information generic answer --check tires and rims [bent or damage balance ] brake caliper hanging up or flex line failure ---cv axle[s] ---steering rack --suspension bent worn
12/2/2023 3:03:33 PM • Chevrolet Cars &... • Answered on Dec 02, 2023 • 29 views
0helpful
1answer

2006 Chevy Cobalt SS. How to get past the antitheft system on it please.

A nice simple answer, you can't. Think of it this way, the car doesn't know you are the owner, and it is there to stop exactly what you are trying to do. You have two computer ECM and BCM, plus the antitheft module and a number of sensors all trying to stop you. All you have to do is the re-learn procedure. Plan B is an auto electrician or alarm / radio installer or auto locksmith. 30 Minute Re-Learn Procedure
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to start the engine, then release the key to ON (vehicle will not start).
  3. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF.
  4. Turn OFF the ignition, and wait 5 seconds .
More items... • Nov 11, 2011

2006 Chevy Cobalt: theft..crank..the dash lights..battery light

How do i perform the 2006 Chevy Cobalt anti theft system ...

Vehicle History https://www.vehiclehistory.com > questions > how-do-... Jul 16, 2020 - To perform a reset of the 2006 Chevy cobalt theft system, turn the ignition key to position and wait for approximately. 10 Minutes and the ... 5 answers · Top answer: To perform a reset of the 2006 Chevy Cobalt theft system, turn the ignition key to position and wait for approximately 10 minutes for the flashing anti-theft ...

How do I reset my 2005 chevy cobalt anti theft system?

Vehicle History https://www.vehiclehistory.com > questions > how-do-... Apr 9, 2020 - Perhaps the simplest is to disconnect the negative battery terminal, let it sit for 15 to 30 minutes, and then reconnect. However, some anti- ... 8 answers · Top answer: There are a few things You can do to reset the anti-theft system on the 2005 Chevrolet Cobalt. Perhaps the simplest is to disconnect the negative ...

Won't start, theft lock symbol on - Cobalt SS Network

CobaltSS.net https://www.cobaltss.net > forums > wont-start-theft-lo... Jul 9, 2008 - To reset it, you need to stick the key in, turn it to start, and let the key sit in the ON position for 10 minutes, the light will start to ... Won't start/Security Lock out Jan 30, 2012 Theft mode, won't start Mar 10, 2013 Security Learn Procedure Jul 31, 2007 Car wont start, security locked me out :( Dec 26, 2010 More results from www.cobaltss.net ..
11/29/2023 2:47:07 AM • 2006 Chevrolet... • Answered on Nov 29, 2023 • 63 views
0helpful
1answer

2000 Chevy S10 LS. Heated o2 sensor, where does it go?

Question edited for clarity. Question moved to model category. Yes there are three o2 sensors Bank 1 in the exhaust manifold Bank 2 in the exhaust manifold One after the Catalytic Converter. Not sure what you mean 'where is the best place to put it'? The scan tool tells you which one needs replacing by a P**** Code, or are you just replacing one for fun? Answered here on JustAnswer dot com The o2 sensors are located in the exhaust pipe. The one you are looking for is the post cat sensor. The sensor furthest back in the pipe after the catalytic converter. Mar 19, 2007

Chevy S10 Oxygen Sensor Location: Q&A Guide - JustAnswer

11/28/2023 3:48:22 AM • 2000 Chevrolet... • Answered on Nov 28, 2023 • 56 views
0helpful
3answers

2000 Chevrolet Silverado Oxygen Sensor (O2S)where

It's inline in the exhaust system. You'll see one on each bank of the engine before the catalytic converter and one or two behind the converter. It's fairly easy to change, get your hands on an O2 sensor socket and get an OEM GM replacement sensor, don't cheap out or you'll be asking for trouble.
11/27/2023 5:57:55 PM • 2000 Chevrolet... • Answered on Nov 27, 2023 • 568 views
0helpful
2answers

Need torque spec for pinion

NEW BEARING PRELOAD SHOULD BE 20-25 INCH POUNDS. USED BEARING PRELOAD TORQUE 10 - 15 INCH POUNDS.
11/26/2023 11:34:23 PM • Chevrolet Astro... • Answered on Nov 26, 2023 • 1,180 views
0helpful
1answer

2012 Chevy Spark 1.2L 16 Valve engine B12D1 Torque settings.

Question edited for clarity. Question moved to model category. They are all here for B12D, and more in the main link below. images of sequence too.

Engine Aveo 1.2 B12D Specifications PDF

Scribd https://www.scribd.com > document Fastener Tightening Specifications · Timing Chain Lever Retaining Bolts 10 Nm 7.4 lb ft · Engine Mechanical Specifications · l No. 4 23-23.021 mm 0.9055-0.9063 in. Rating: 5 · ‎1 vote https://www.google.com/search?q=B12D1+Torque+settings
11/25/2023 8:04:40 PM • 2012 Chevrolet... • Answered on Nov 25, 2023 • 90 views
0helpful
1answer

1992 Chevy G20 Van. How to Change the radiator in it please?

Question edited for clarity. Question moved to model category.

Newbie!! G20 radiator replacement - Chevy Message Forum

Chevy Talk https://www.chevytalk.org > fusionbb > showtopic > tid Mar 10, 2015 - Resist the temptation to add anything to the radiator. Working on a van is challenging enough without having nuisances like this. Be patient as ... V8 350 Temp gauge sending unit 3 posts Jun 27, 2008 Coolant leak? '91 van again. 12 posts Apr 18, 2014 More results from www.chevytalk.org ..
11/24/2023 5:18:08 AM • 1992 Chevrolet... • Answered on Nov 24, 2023 • 28 views
0helpful
1answer

2003 Chevy Silverado. The wipers won't turn off!

Question edited for clarity and spelling of Silverado. Question moved to model category.

Windows Wipers Won't Shut Off - 1999-2013 Silverado & ...

GM-Trucks.com https://www.gm-trucks.com > forums > topic > 84074-... Sep 18, 2008 - I have a 2003 GMC Seirra and my window wipers won't shut off. The variable speed appears also not to be working properly. wipers won't turn off 03 yukon xl - GM-Trucks.com Sep 13, 2006 Wipers won't shut off - - GM-Trucks.com Mar 16, 2021 Wiper Wont Turn Off - 1999-2013 Silverado & Sierra 1500 Feb 13, 2019 More results from www.gm-trucks.com

Why Won't My Windshield Wipers Turn Off?

The Family Handyman https://www.familyhandyman.com > Automotive Jul 9, 2020 - Got windshield wipers that won't turn off? There are several possible causes. Learn why this problem happens and how to fix it fast.

I can't turn off the windshield wipers that came on their

JustAnswer https://www.justanswer.com > Chevrolet Repair Feb 3, 2022 - In order to turn off the wipers for now you can try smacking the top of the fuse panel to see if the relay disengages. 1 answer · Top answer: Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm ...
11/22/2023 8:54:04 PM • 2003 Chevrolet... • Answered on Nov 22, 2023 • 36 views
0helpful
1answer

2013 Chevy Cruze. The Radio is locked on it?

Question edited for clarity. Question moved to model category. There are three ways to fix that. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..
11/22/2023 3:14:08 AM • 2013 Chevrolet... • Answered on Nov 22, 2023 • 32 views
0helpful
1answer

2009 Tahoe. The rear lift gate was wide open in the middle of the night. I didn't open with a fob and the manual switch is missing?

Question edited for clarity and typos. Question moved to model category. Others report the same issue. https://www.google.com/search?q=2009+Tahoe.+The+rear+lift+gate+open+on+its+own
11/21/2023 4:30:06 AM • 2009 Chevrolet... • Answered on Nov 21, 2023 • 30 views
0helpful
1answer

2006 Chevy Silverado. The brake lights on my truck aren't working. All other lights work. I've replaced the fuse, the bulbs and the brake light switch. Still not working. Any ideas.

There are some ideas in the link, but because of the Cruise Control issue, I think you need an auto electrician as things like this are controlled by ECM and BCM. https://www.google.com/search?q=2006+chevy+silverado+brake+lights+not+working https://www.google.com/search?q=auto+electrician+near+me ..
11/21/2023 3:17:40 AM • 2006 Chevrolet... • Answered on Nov 21, 2023 • 52 views
0helpful
1answer

1991 Chevy S-10. No power at the ECM fuse?

11/21/2023 3:05:42 AM • 1991 Chevrolet... • Answered on Nov 21, 2023 • 42 views
0helpful
2answers

Firing order for 1998 s10 2.2l with coil packs

The firing is 1 3 4 2. From the front of engine to the back, the cylinders are numbered 1 2 3 4. Cylinders 1 and 4 are on the same coil pack. Cylinders 2 and 3 are the other coil pack.
11/19/2023 3:05:31 PM • 1998 Chevrolet... • Answered on Nov 19, 2023 • 3,159 views
0helpful
2answers

I need a vacuum diagram for a 1988 Chevrolet S-10

f288ed9.jpg

Fig. 44: 1989 2.8L TBI engine - federal altitude



2c7ab79.jpg

Fig. 46: 1989 2.8L TBI engine - California



81926f4.jpg

Fig. 47: 1989 2.8L TBI engine - leaded fuel export without catalyst

Hope help with this (remember rated this).





11/19/2023 12:56:18 AM • 1988 Chevrolet... • Answered on Nov 19, 2023 • 3,854 views
0helpful
1answer

My 1994 Chevy 1500 4x4 wont go into four wheel drive.

Sounds like the problem that I had with my '94 chev sub k1500, twice! The first time it was due to a blown fuse. Now I carry a spare 20A fuse when I go off-road. The second time the electrically controlled/heated, fluid filled actuator mounted on the front diff failed. I now carry a spare actuator when I go off-road. the actuator is powered when the switch on the top of the transmission is energized. I have had no problems with that switch, or the connecting wiring.
11/18/2023 4:32:22 AM • 1994 Chevrolet... • Answered on Nov 18, 2023 • 385 views
0helpful
1answer

2008 Chevy Silverado. My doors locked with keys in the ignition. I was able to push on both unlock buttons with a thick wire but still won't unlock. Any help would be appreciated.

Your vehicle came with 3 keys, just use one of the other keys. If you only had one key, give your head a shake :>D Or https://www.google.com/search?q=auto+locksmith+near+me ..
11/18/2023 10:08:56 AM • 2008 Chevrolet... • Answered on Nov 18, 2023 • 35 views
0helpful
1answer

2005 Chevy Malibu Maxx no ignition cylinder.

The simplest solution here is to have the ignition barrel replaced. There is so much electronics involved in a modern cars bypassing (hot wiring) the ignition can just cause more problems and usually expensive ones. The barrels themselves aren't that expensive and any good auto electrician should be able to fit and code the keys for it. Sadly it's the fitting that could be the expensive bit.
11/16/2023 5:08:18 PM • 2005 Chevrolet... • Answered on Nov 16, 2023 • 45 views
0helpful
1answer

2004 Chevy Malibu. How to replace the airbag module please?

Hdlyles2 Better to make your own Post rather than tagging it in the Additional Information section of an 11 year old post. That section if for Experts asking the OP for further information before committing to an answer, because an answer marks it as solved. https://www.google.com/search?q=air+bag+module+on+a+2004+Chevy+Malibu..
11/16/2023 5:10:02 PM • 2004 Chevrolet... • Answered on Nov 16, 2023 • 420 views
0helpful
1answer

2005 Chevy Malibu Maxx. It was broken into. Anti theft help needed please?

Question edited for clarity. Question moved to model category. Sorry to hear that happened to you. Try resetting the anti-theft system. https://www.google.com/search?q=2005+Chevy+Malibu+reset+security ..
11/15/2023 5:36:56 PM • 2005 Chevrolet... • Answered on Nov 15, 2023 • 44 views
Not finding what you are looking for?
Chevrolet Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...