Chevrolet Cars & Trucks - Page 10 - Recent Questions, Troubleshooting & Support

0helpful
1answer

1997 Chevy Astro Starcraft, 4.3L. What could have happened?

Question edited for clarity. Question moved to model category. Black Smoke is rich mixture Blue Smoke is oil White Smoke is Steam What is this 'Trumbler' that you changed?? Not even Google has a clue! Are you losing coolant? Did someone put Windshield Washer fluid into the engine oil filler? You are burning water. The ECM doesn't like it so it it shakes. At idle there isn't as much pressure to stop the water entering the combustion chamber. Likely a failed cylinder head gasket. You can do a pressure test and there is also a test that identifies exhaust gases in the coolant. ..
11/4/2023 4:41:04 PM • 1997 Chevrolet... • Answered on Nov 04, 2023
0helpful
2answers

1988 Chevrolet C1500 5.7L what cause the engine not to started?

Fuel supply it sounds like.
11/4/2023 6:34:46 AM • Chevrolet Cars &... • Answered on Nov 04, 2023
0helpful
3answers

My Iroc is an 88, 305 TPI. Starts fine. Idles

Inspecting your other problems first:(as yo replaced you MAF)

Take a real good look at the throttle "butterfly" valve. They have a tendency to get buildup with dirt and will stick slightly open, confusing the computer into thinking that you are pushing on the "go" pedal. Get some carb cleaner, or even better, GM Top Engine cleaner, and really clean out the throttle valve and air intake area. I have seen several similar problems fixed this way. If this does not take care of it, it may be worth paying someone an hours labor to hook up a good scanner and see what is going on. You can waste a lot of money on the newer cars throwing a lot of expensive parts at them and still not fixing the problem. It could be a simple loose connection somewhere. A good tech can catch this type of stuff with a good scan tool.
Always check the fuel pressure .
It might be the in tank fuel pump or clogged filter

checking that can be done by you easily:
you might check the ground wires that are located at various places on the engine
check your IAC valve (idle air control), this is located on the passenger side underneath the throttle body. These get all carboned up and can't re-seat themselves properly. You may have to perform a minimum idle setting also. This isn't to hard but is more complicated than on a non-computer controlled

MAF signal checking:

I used a small straigt pin and shoved it in the back side of the MAF connector on the signal line. I started the motor and expected to see the voltage signal to start low at idle and increase smoothly with engine speed. Instead what I saw was a stead 5 volts meaning the ECU had supplied the bias signal but the MAF wasn't loading it down to generate the signal. The issue was that the MAF socket pins in the connector were slightly sprung and had a thin layer of oxidation on them. I tiny rolled up piece of sand paper buffed the terminals up. A tiny pick probe was used to squeeze the socket pins closed slightly. A light doping of dielectric grease kept the moisture out and it's been running fine for 5 or so years no

Hope this helps,kindly RATE ME
10/30/2023 4:08:28 PM • 1987 Chevrolet... • Answered on Oct 30, 2023
0helpful
2answers

97 Malibu. V6-3100. Starter turns engine, but car

I think you may have answered your own question. I would check to see if the fuel pump is turning on when you turn the key on to the run position. You should hear a buzz sound coming from the gas tank. I would start there.
10/27/2023 5:54:48 PM • 1997 Chevrolet... • Answered on Oct 27, 2023
0helpful
1answer

2000 Chevy Venture. Need help with it please?

Question edited for clarity. Question moved to model category.

P1404 Code - What Does It Mean & How To Fix It

OBD2PROS https://obd2pros.com > Complete List of OBD2... A P1404 code is not considered serious. The vehicle will run, but with decreased performance however, you should have it looked at right away. If the vehicle is ... ‎Meaning · ‎Common mistakes

P0404 OBD-II Trouble Code: Exhaust Gas Recirculation ...

YourMechanic https://www.yourmechanic.com > Articles P0404 is a diagnostic trouble code (DTC) for "Exhaust Gas Recirculation Circuit Range/Performance". This can happen for multiple reasons and a mechanic ...

Error Code P0137: Oxygen Sensor Circuit Low Voltage B1S2

AutoZone https://www.autozone.com > diagnostic-trouble-codes Specifically, the diagnostic trouble code P0137 yields the following message: "O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)." Here's what that means: Your ... ‎What Does the Code P0137... · ‎What Are the Symptoms of a... ..
10/25/2023 6:48:38 PM • 2000 Chevrolet... • Answered on Oct 25, 2023
0helpful
1answer

2004 Chevy Trailblazer idles rough.

If it has not pulled any codes (idiot light). Clean your throttle body, and change your spark plugs with A/C Delcos #41-103, most other brands will cause rough idle like Autolites and Bosch. This would be a cheap way to fix this problem.

If by chance you have just recently changed the battery or had the battery unhooked. Let me know, it's an easier fix that costs virtually nothing.
10/22/2023 3:12:15 AM • 2004 Chevrolet... • Answered on Oct 22, 2023
0helpful
1answer

2007 Chevy Malibu LS won't hold start and I need help please?

When you disconnect the battery, you have to reset the security system and the engine immobilizer. https://www.google.com/search?q=2007+Chevy+Malibu+LS+reset+security

How do I reset my 2007 chevy malibu anti theft?

Vehicle History https://www.vehiclehistory.com > questions > how-do-... To reset the anti theft in a 2007 chevy malibu you will need to unlock the door with the fob, press the door lock button on the door, then close the door. Like. 4 answers · Top answer: In order to reset the anti theft system on Your 2007 Chevy Malibu You'll first need to put the key in the ignition and move it in to the on position. ...

How do i perform a chevy malibu security reset?

Vehicle History https://www.vehiclehistory.com > questions > how-do-... First, park the car and make sure all doors are shut and locked. Then, slot in Your key into the driver side door and unlock the car. ..
10/22/2023 12:53:18 AM • 2007 Chevrolet... • Answered on Oct 22, 2023
0helpful
4answers

Are the head lights on all the time 1999 chevy silverado 1500 4x4

In the 1999 Chevy Silverado 1500, the headlights are not designed to be on all the time by default. They are typically controlled manually by the driver using the headlight switch, although some vehicles may have a daytime running lights (DRL) feature. If the headlights are continuously on, it could be due to a modification or wiring issue, and it's recommended to consult the vehicle's manual and seek professional assistance if needed.
10/21/2023 7:08:41 AM • 1999 Chevrolet... • Answered on Oct 21, 2023
0helpful
2answers

1999 Chevy Silverado. How to adjust the shift cable please?

Question edited for clarity. Question moved to model category. Video here https://www.google.com/search?q=1999+Chevy+Silverado.+How+to+adjust+the+shift+cable ..
10/20/2023 6:48:04 AM • 1999 Chevrolet... • Answered on Oct 20, 2023
0helpful
1answer

2012 Chevy Malibu. Diagram for the serpentine belt please?

Question edited for clarity. Question moved to model category. Lots of diagrams especially on the images tab. https://www.google.com/search?q=2012+chevy+malibu+serpentine+belt+diagram ..
10/20/2023 1:34:31 AM • 2012 Chevrolet... • Answered on Oct 20, 2023
0helpful
1answer

I have a 1999 Chevy Silverado 4l60e transmission, every gear is neutral.

First make sure the fluid is full. If it is then you have internal problems. Possibly the linkage or oil pressure .
10/19/2023 5:43:17 PM • 1999 Chevrolet... • Answered on Oct 19, 2023
0helpful
2answers

Where is fuse box in

Should be under the drivers side dash.. turn the key on.. turn on either the hazards or turn signal.. the flasher unit is plugged into the fuse box.. you will hear it.. helps locating it.. unless of course this is what you are replacing!

Good luck
10/19/2023 5:40:28 PM • 1972 Chevrolet... • Answered on Oct 19, 2023
0helpful
1answer

Belt routing 1972 corvette 454

Should be 3 belts
10/19/2023 5:39:51 PM • 1972 Chevrolet... • Answered on Oct 19, 2023
0helpful
1answer

Torque specs for inner joint bolts to diff. 2004 chevrolet 2500 4x4 front axle

The torque specifications for the inner joint bolts that connect the front axle to the differential on a 2004 Chevrolet 2500 4x4 may vary slightly depending on the specific model and components used. However, I can provide you with some general torque guidelines. Please note that it's essential to consult your vehicle's service manual or contact a qualified mechanic for the exact torque specifications, as they can vary depending on factors like the specific front axle design and any aftermarket modifications. Here's a rough estimate:
  • Inner Joint to Differential Housing Bolts: Typically, the torque specification for these bolts is in the range of 85-100 lb-ft (115-135 Nm). However, it's crucial to verify the exact torque value from your vehicle's service manual.
Always use a reliable torque wrench to ensure that the specified torque is applied accurately, and follow proper tightening sequences and procedures as outlined in the service manual to prevent over-tightening or under-tightening, which can lead to problems with the front axle and differential.
10/18/2023 5:22:39 PM • Chevrolet Cars &... • Answered on Oct 18, 2023
0helpful
2answers

Where is the starter located on 89 corvette

The starter is located on the passenger side where the engine mates with the transmission. It's held on by two bolts and there are wire harness that need to be disconnected and are live so you need to disconnect the battery ground first. Good luck and hope this helps. Keep me posted if you need instructions to removing the starter or you can log on to Auto Zone and register free of charge and you can get a print out on how to get the job done with common tools. Be safe friend. 
10/17/2023 7:48:45 PM • 1989 Chevrolet... • Answered on Oct 17, 2023
0helpful
2answers

Rear ceiling vents are not blowing air on tahoe

I have replaced everything from the little fuses to the mega fuse to the actuator and resistor and tested the blower and still nothing please help me
10/16/2023 9:47:07 PM • 2009 Chevrolet... • Answered on Oct 16, 2023
0helpful
1answer

Please help me with torque settings for chev utility 1.4 2012 thanks

if your engine code(suffix) is z14xep
head bolts-renew bolts 25nm 60 deg 60 deg 60 deg
main bearings-bolt sizeM6-10nm 60 deg 15 deg
M8-25nm 60 deg 15 deg
big ends-bolt size-M6-10nm 60 deg 15 deg
M6.5-13 nm 60 deg 15 deg
10/16/2023 9:51:37 AM • Chevrolet Cars &... • Answered on Oct 16, 2023
0helpful
1answer

Where are the freeze plugs located on a 2000 Chevy blazer.

This is the easiest way to answer this question. https://youtu.be/2zdnd5ikynU?si=4QKEWGo4BdyxnDxf
10/15/2023 1:33:19 PM • 2000 Chevrolet... • Answered on Oct 15, 2023
0helpful
1answer

Where is the cigarette lighter fuse for a Chevrolet City Express LT?

The cigarette lighter fuse for a Chevrolet City Express LT is located in the Engine Compartment Fuse Box. The location of the fuse box varies depending on the year of the vehicle. For instance, in 2003-2007 models, the cigar lighter (power outlet) fuses are numbered 29 (Auxiliary Power Outlets) and 30 (Cigarette Lighter). In 2008-2009 models, they are numbered 33 (Auxiliary Power Outlet) and 38 (Cigarette Lighter). In 2010-2022 models, they are numbered 25 (Auxiliary Power Outlet) and 73 (Cigarette Lighter).
10/15/2023 3:10:22 AM • Chevrolet Cars &... • Answered on Oct 15, 2023
0helpful
2answers

Location 2007 Silverado park neutral safety switch

left front of transmission at shift shaft.
10/14/2023 5:03:54 PM • Chevrolet... • Answered on Oct 14, 2023
Not finding what you are looking for?
Chevrolet Logo

223,570 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...