BMW Cars & Trucks - Recent Questions, Troubleshooting & Support
Programing anew key
BMW Multi Tool is known as one of the best car key programmers for BMW vehicles ever since OBDII tools were available in last century.
It has multi-function: key programmer, odometer correction, eeprom read and write, Synchronization Codes, and so on.
BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before running software you must connect dongle and hardware device to computer.
Newest version is V7.0
BMW Multi Tool V7 0 for CAS1 3 and EWS Powerful Than AK300
2/18/2024 1:24:00 AM •
2001 BMW 325
•
Answered
on Feb 18, 2024
2002 325 BMW remove back Panel to Replace Speaker
Here's what to do:
1. Use the pry tool to carefully pop up the window switch assembly from the door panel. Then, disconnect the wiring harness from the switch assembly.
2. Take out the two Phillips-head screws located under the armrest.
3. Use your pry tool to gently unclip the door panel from the door. Start at the bottom and work your way around the sides, being careful not to break the clips that hold the panel in place.
4. Lift the whole panel up to free it from the window sill.
5. Disconnect the wiring harnesses on the backside of the door panel by pressing the tabs and pulling the connectors apart.
6. Once the panel is off, you'll be able to see the speaker, which is held in place by screws. Take off these screws to free the speaker.
7. Disconnect the wiring harness from the speaker.
8. Connect the new speaker to the wiring harness and screw it into place. Then, put the door panel back on by reversing the steps above.
2008 BMW 328Xi. What is wrong with my car?
Sometimes disconnecting the battery can be an advantage, but sometimes it is the worst thing. Your vehicle is very complex computer-wise and now it has resets and relearning to do. Having said that, you have some underlying issue. You need an auto electrician with a professional grade scan tool computer to diagnose what it wrong. My guess is an ABS sensor error if by 'locked' you mean brake locked..
https://www.google.com/search?q=auto+electrician+near+me
..
Head bolt touqe settings
Tightening torques
Do not reuse the bolts as they may be stretched.
Cylinder head to engine block
Stage 1: 32Ft-lbs
Stage 2: +90degrees
Stage 3: +90degrees
Cylinder head to lower timing
chain cover: 89in-lbs
How can I get the HDC to turn off in my 2002 bmw x5?
To turn off HDC on a BMW, all you have to do is press the HDC button located on the center console. The button will have an image of a vehicle going downhill with a speedometer above it, and you'll know it's off if there are no lights illuminated above it. If you ever want to turn the system on again, just press the button again.
Not finding what you are looking for?