2
Sam posted an answer for this Canon imageRUNNER 2200:
"It sound like the paper tray is not set correctly. Probably set to landscape and trying to..."
SamSam posted an answer for this Canon imageRUNNER 2200:
"Turn off the machine. Hold down the stop button and turn the machine on. If it comes..."
Sam
Sam posted an answer for this Kyocera Mita KM-2530 Laser Printer:
"Your charge corona grid is shorting out. It either has alot of toner built up on it, (from..."
Sam
Sam posted an answer for this Kyocera Mita KM-5035 Printer:
"I had the same problem. I would turn the machine off/on and it would work for another..."
Sam
Sam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"You say it copies fine. I would delete the print driver and download the latest driver..."
Sam
Sam posted an answer for this Kyocera Mita FS-1030D Laser Printer:
"When you add toner to the machine, they tell you to clean the charge wire by running a..."
Sam
Sam posted an answer for this Kyocera Mita KM-2050 Printer:
"Open the left fax display cover. Find and hold down the "Alternate Display" key. While..."
SamSam posted an answer for this Kyocera Mita KM-5035 Printer:
"The 2050 uses 2 network connections, one for the printer and one for the scanner. Before I..."
Sam
Sam posted an answer for this Kyocera Mita KM-1815 All-In-One Laser Printer:
"I don't completely understand your description. On any printer problem, I always delete..."
SamSam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"Machine has to be ready to Copy. Press the "Printer" button, touch "Printer Menu",..."
Sam
Sam posted an answer for this Kyocera Mita (km-c850d) All-In-One Printer:
"C2550 = Drive Motor Problem. Try to reset it first. Enter the numbers "10871087" on the..."
SamSam posted an answer for this Kyocera Mita KM-2530 Laser Printer:
"Are you using codes? Maybe you turned on the accounting function for the printer. Is it..."
SamSam posted an answer for this Kyocera Mita KM-1815 All-In-One Laser Printer:
"There is a 3 year warranty on the process unit. If you have had it less than 3 years your..."
Sam
Sam posted an answer for this Kyocera Mita KM 1510 Laser Printer:
"Hytech in Florida repairs them. Also Ambassador Tech."
Sam
Sam posted an answer for this Copystar CS-2114 Copier:
"You probably had a problem with the drum cleaning blade....Now you probably have a problem..."
SamSam posted an answer for this Copystar CS-2114 Copier:
"The toner hopper motor was modified for this problem some time ago. Was this one updated?..."
Sam
Sam posted an answer for this Copystar CS-1500 Copier:
"I had the same problem. And after spending as much time as you have. I replaced the fuser..."
Sam
Sam posted an answer for this Office Equipment & Supplies:
"The scan glass is dirty or it has a scratch on it. It can be a small dot of ball point pen..."
Sam
Sam posted an answer for this Kyocera Mita FS 1000+N Laser Printer:
"Download the PCL5 driver."
Sam
Sam posted an answer for this Kyocera Mita FS-C5016N Printer:
"Clean the LED array for the yellow unit. Clean the corona and grid.Or you might have a bad..."
SamSam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"I assume the print driver is on the server and shared. I would start there. I would think..."
SamSam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"Means a defective lamp invertor PCB. Located right under the lamp. Or a bad main board. Or..."
SamSam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"Defective Optical Laser Unit or main board. Is it making noise?If so, it is the laser..."
SamSam posted an answer for this Kyocera Mita KM-3035 All-In-One Laser Printer:
"Are you a tech? Do you have the scanner utility installed and running? Do you have the..."
Sam
Office Equipment &... 27 answers
