Can Do!
Douglas Plant posted an answer for this Sewing Machines:
"If you are trying to view the designs on a computer then you need an embroidery software..."
Douglas Plant posted an answer for this Brother Sewing Machines:
"The PC8500 does not do free motion well because of its tension design, it is not you.It..."
Douglas Plant posted an answer for this Janome Sewing Machines:
"In the bottom of the machine is where the reverse mechanism is. There is a cam that slides..."
Douglas Plant posted an answer for this Janome Sewing Machines:
"I suspect the motor is bad."
Douglas Plant posted an answer for this Kenmore Sewing Machines:
"There is a zig zag gear in the top of the machine that breaks somertimes and thus prevents..."
Douglas Plant posted an answer for this PfaFF Sewing Machines:
"It sounds like the sensor connection where you plug in the buttonhole foot is bad."
Douglas Plant posted an answer for this Sewing Machines:
"The problems will be the technology, you will have to get a floppy disk for your computer...."
Douglas Plant posted an answer for this Sewing Machines:
"It may be as simple as the dial is set to buttonholes which makes a short stitch and the..."
Douglas Plant posted an answer for this Sewing Machines:
"If you are the original owner then you should be able to go to a viking dealer and they..."
Douglas Plant posted an answer for this Sewing Machines:
"It has to be one of three things... 1-Needle is not inserted all the way up in the..."
Douglas Plant posted an answer for this Singer Sewing Machines:
"It sounds like a mechanical issue, when the machne starts to slow, stop using the control..."
Douglas Plant posted an answer for this Husqvarna Sewing Machines:
"Remove the cover on the left side of the arm and there is a knob that you push to the..."
Douglas Plant posted an answer for this Elna Sewing Machines:
"It sounds like you have a broken can gear, if you have it repaired be sure it is done by..."
Douglas Plant posted an answer for this Sewing Machines:
"I do not believe that the parts are available now."
Douglas Plant posted an answer for this Sewing Machines:
"You will need a Mac version of the Viking software."
Douglas Plant posted an answer for this Sewing Machines:
"It is on the bottom of the machine"
Douglas Plant posted an answer for this New Home Sewing Machines:
"Try removing the cover plate on the bottom of the free arm and cleaning out the lint and..."
Douglas Plant posted an answer for this Sewing Machines:
"Go to Vikings web site, then software support and you should find the drivers there."
Douglas Plant posted an answer for this Husqvarna Viking Emerald 116 Sewing Machine:
"Try using a Schmetz stretch needle size 11 )7015-HS)"
Douglas Plant posted an answer for this Husqvarna Sewing Machines:
"Try using a needle for metallic thread, the eye is larger and may help"
Douglas Plant posted an answer for this Janome Sewing Machines:
"I would try a new bobbin case, it would be the easiest thing to try and do,"
Douglas Plant posted an answer for this Janome Sewing Machines:
"It Will be a Hi shank...one did come with the machine,"
Douglas Plant posted an answer for this Janome Sewing Machines:
"Buy a new plate"
Douglas Plant posted an answer for this Singer Sewing Machines:
"15-91 is full size."
Douglas Plant posted an answer for this Brother Sewing Machines:
"Sounds like your bobbin tension is too loose."
Douglas Plant posted an answer for this Brother Sewing Machines:
"Normally this is caused by the upper thread not being threaded correctly. It is not on the..."
Douglas Plant posted an answer for this Brother Sewing Machines:
"That means your bobbin case tension is too tight."
Douglas Plant posted an answer for this Singer Sewing Machines:
"Go to Singers website and instruction books can be downloaded there."
Douglas Plant posted an answer for this Sewing Machines:
"If the bobbin has thread on it, remove the thread so the bobbin is empty, it should pull..."
Douglas Plant posted an answer for this Janome Sewing Machines:
"If you will very carefully pry up the bobbin winder base by using pressure on both sides..."
Douglas Plant posted an answer for this Janome Sewing Machines:
"You can go the the Janome web site to find drivers for your computer. When you save..."