Zanussi Washing Machines - Page 8 - Recent Questions, Troubleshooting & Support

Might be a loose wire on the rotating program switch or a faulty switch.

Pull the hose off the back of the drain pump, there might be something caught in the filter housing

I would check the brushes on the motor. If these are worn that can stop the machine working full spin under load

Blocked filter or faulty pump

The belt is in the back

The catch is broken that locks the door

Could be door boot seal or indeed the drum having a hole in it, the seal is simple to do drum is not worth while.....Although a good grade Silicone would seal it...

I would contact zanussi on this problem they would know more about this than anyone .

Hello,

Check the heathing elements.

I think you may find a button or other debris in the pump housing preventing the pump from emptying all the used water eric

go to the manufactures website and download the user manual its normally free eric

my best advice is to call the engineer or go on line to the manufactures website and request if there is a solution as force is not the answerer eric