Verbatim Computers & Internet - Recent Questions, Troubleshooting & Support

I would ask a lawyer who is well versed in copyright law if you wish to change a public OS. Why not download the beta and that can be adjusted and returned for evaluation.

i dropped the 98122 mouse and the parts and board fell out. the left button is not working now- the mouse wont completely close and does not scroll. is there a way we can dismantle it to check if any parts are missing???

The device is USB powered and the first test is to see if it opens on another computer and if not, another cable. If it does not work, the next thing to know is the probability of being able to get the unit operating again is very slim. Those devices use SMT components and they require very specialized service and diagnostic equipment. That is the reason that these drives come with back up software. You need to back up the back up. There is a slight chance that you may be able to remove the drive from the housing and plug it into a computer directly, of use a universal cable to activate it. Keep in mind that the drive has a lifespan.

You only get to make four or five code changes and, for copyright reasons, thats it. You can download Anydvd from Slysoft.com and it will nest in your desk top, and remove all dvd codes as you load. The dvds then run "Region Free" They will copy with Dvd shrink and so your back ups are region free as well.

That's a Mac error stating that the file you are trying to delete is currently being accessed. First, close all open programs and try to delete the file. If that doesn't work, eject the drive by clicking the eject button in a Finder window. Disconnect the drive. Reboot. Then reattach the drive and immediately delete the file.

Yes, just plug two of the drives into your computer at once, and you can then drag all the files and folders from the older (source) drive to the new (destination) one in File Explorer. You may want to set up separate folders for each of the source drives, this will avoid conflicts if you have files and folders of the same name on the different external portables. If you want to automate the process, look for the shareware "Unstoppable Copier" which makes it easier to do mass copies.

It's probably faulty. I've seen several pen drives fail like this. You can try recovery software like Get Data Back or Recuva but depending on the problem, it will not work (if its a hardware problem). Try to see if the flash shows up in "Disk Management". If it does and it shows 32GB, you may have a chance of recovery.

Assuming it’s powered on, do you hear the “usb” sound when you connect it to the computer? If not, try a different usb port, or a different cable. If you hear the sound, check for the disk in “computer management”. It may need partitioned or formatted.

http://www.drivesaversdatarecovery.com/

Step 1: w7 First, please disconnect all USB devices and then perform the following steps: Click "Start" button, type "devmgmt.msc" (without quotation marks) in the "Search" bar and press "Enter". Click "Continue" if necessary. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK". Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers". Then, restart your computer and Windows 7 will reinstall all USB controllers automatically. for xp click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X you will need to update/reinstall drivers right click to reinstall drivers if you can see your usb but its not working ports(com&lpt)right click update driver sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again, if you can see your usb drive but its not working ports (com&lpt) right click update driver if this fails to fix the problem check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems to a computer and its parts

Maybe something here: https://support.microsoft.com/en-us/help/15290/windows-connect-bluetooth-device I f not a Windows machine please click/tap the Comment link and give useful information.