Toshiba Satellite - Recent Questions, Troubleshooting & Support

The product key is associated with the MS Office 2013 software, not the specific MS Windows version of Operating System - unless the MS Office lists a minimum version of OS ie: "Windows 8.0" In this case, it would not install on Windows 7. Otherwise, you should be able to install it on Windows 7, Windows 8, or later.

Here are some possible reasons why your Toshiba Satellite P15 mouse pointer is sticking or stalling when the laptop is on AC power: Driver issue: The touchpad driver may be outdated or corrupted. Try updating the touchpad driver to the latest version. Hardware issue: The touchpad itself may be faulty. If the problem persists after updating the driver, you may need to replace the touchpad. Battery issue: The battery may be causing interference with the touchpad. Try removing the battery and see if the problem goes away. Software issue: There may be a software conflict that is causing the problem. Try disabling any recently installed software to see if the problem goes away. Here are some troubleshooting steps you can try to fix the problem: Update the touchpad driver: Download the latest touchpad driver from the Toshiba website. Uninstall the current touchpad driver. Install the new touchpad driver. Disable touchpad enhancements: Go to Control Panel > Hardware and Sound > Mouse. Click on the "Device Properties" tab. Uncheck the box next to "Enhanced pointer precision". Clean the touchpad: Turn off the laptop. Dampen a lint-free cloth with alcohol and gently wipe the touchpad. Let the touchpad dry completely before turning on the laptop. Update Windows: Make sure your computer is up to date with the latest Windows updates. If you have tried all of these troubleshooting steps and the problem persists, you may need to contact Toshiba customer support for further assistance.

Under Windows Vista and 7 , frames are displayed as a CD drive. If you click on it twice, immediately opens the image management program DPFMate.I hope helps

Take out the battery, put the power cord back in, turn on the machine, wait for it to get into windows, put back in the battery.
please rate
Nik

http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1596141&rpn=PSAD6U&modelFilter=A135-S2276&selCategory=3&selFamily=1073768663

Copy and Paste the Link to your URL

You can download any/all the Windows XP device drivers for your model laptop from the Toshiba WEB site from their download page.
Go to :-.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp#

I don't know what exactly fixed the problem but I managed to fix it. I'm using a Toshiba Satellite A215 by the way.

Here's what I did
Control Panel >> System Maintenance >> Device Manager

Go to Imaging Devices and right-click "Chicony USB 2.0 Camera" and choose "Update Driver Software"

First I clicked on "Search automatically for updated driver software" but everything was already up to date. So then I went to "Browse my Computer for Driver Software" and then to "Let Me Pick from a List". I updated the USB Video Device and rebooted but that only made it worse I think. Then I tried updating one of the "Chicony USB 2.0 Camera"'s and that did the trick. Yey. So now my webcam works.

Use the "Options" button, select a folder to extract the package, unchek the auto-lunch option, navigate to the specified folder, there is a TVAP sub-folder, lunch the setup.exe inside that folder.

How to Get Employment Security With Correct Japan Work Visa Japan is no different from other developing nations whereby grass seems greener on its side of the pasture. It attracts its fair share of foreign businesses as well as nationals seeking to work within its lands. Albeit many adhere to immigration procedures, some choose to test their limits on the basis of ignorance or defiance. By understanding the different types of work visa in Japan, it assures its foreign workers a continual stream of income with no threat of arrest and deportation. Visa simply infers the status of residence. Citizens obviously have no need of it as they automatically satisfy qualifications to freely reside in their country of birth. As for those of alien status who wish to join the local workforce, there should be a category to match one's requirement. Since most countries strive to improve the overall quality of life, professionals are generally welcomed to contribute knowledge and skill. Unskilled labor is normally not granted a visa to avoid flooding and dilution of the workforce. The visa is awarded in accordance to one's area of expertise. Supported with proof of relevant experience, it is based on the field of involvement whilst working in the country. In the event one's work scope changes from one expertise to another, it is essential to apply for a visa under the new circumstances. Different types of work visa in Japan also apply to foreign companies seeking to conduct local business. Domestic companies based abroad wishing to set up a local point of presence need to provide supporting documents to justify internal transfer of foreign workers. Governmental staff for diplomatic duties is assigned a category for legal residence. Over and above the general groupings, designated activities also garner approval from the authorities. Domestic service for non-native residents and citizens of certain nations on working holidays fall into this category of working visa. This, by no means, is the end of the list as it is best to consult the authorities on which visa serves best.Click Here For More Details: http://japanjobandvisaservice.com/blog/change-your-luck-when-apply-work-visa

System Power State S4. System power state S4, the hibernate state, is the lowest-powered sleeping state and has the longest wake-up latency. To reduce power consumption to a minimum, the hardware powers off all devices. Have you done all the hardware (Toshiba) and software updates ( Windows) to your system? Did you change anything in the BIOS? Please answer so I can assist.

1.
Click "Start | All Programs | TOSHIBA | Utilities | HWSetup" to open the laptop's original equipment manufacturer, or OEM, system configuration software.


2.
Click "General," then "Default" to reset the BIOS settings to their original state.

3.
Click "Apply," then "OK."

Restore BIOS Settings at Startup
1.
Restart or power on the Toshiba. Quickly press "F2" to access the boot screen. If you miss the boot screen and the computer continues to start Windows, shut down and try again.

2.
Press "F9" to load the BIOS setup defaults on the laptop. Use the directional pad to select "Yes" and then press "Enter."

3.
Go to the "Exit" tab. Select "Exit Saving Changes." Choose "Yes." Press "Enter" to quit.

You can download the device drivers for your model laptop from the Toshiba WEB site from their download page. Make sure you enter the model of your laptop so you can get the correct drivers. Please click on this link: - http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

dear sir,
i have buy toshiba statellite pro in dubai 2008. but shope men not give me any other cd to driver and sfothwere. so pl sport me to this help.

In BIOS, I made Pointing Device Enable and It has been done.

BIOS is set to password on....
did anyone make changes to ur laptop....
if so then only he can unlock it....as BIOS passwords cannot be unlocked....they are embeded in the BIOS microchip...
only a BIOS update can undo it...and that's very RISKY...

To Fix the (Resolution) problem. Part (1) First; (right) click on an empty area of your Desktop Screen, next click Personalize; click Display Settings from here you can adjust the resolution of your screen. You can also correct the Flickering problem. You can repeat these steps until you are satisfied with the results. Part (2) Right click on screen, at the (top) of the Desktop Menu; check if the Graphic ™ Control Center is visibly present? If, so? Click to open. You adjust the Graphic Settings accordingly. I hope this Fix it.

after you update the BIOS

update the DVD firmare

update the driver for flash reader...i believed you have Texas instrument reader and they have update driver for xp and vista

after you update the driver ..check also the hardware update for microsoft...do custom update when you access windows update

Restart a laptop

1. Windows reinstall thru CD ( crashed graphic drivers )
2. screen itself faulty

These WEB sites may helping Fix the Blue Screen of Death http://www.windowsanswers.net/articles/fix-blue-screen?tid=bluescreenexacthvgoogausnz http://www.maximumpc.com/article/features/blue_screen_survival_guide http://www.pcauthorities.com/pc-errors/how-to-repair-blue-screen-errors/