Sunbeam Vacuums - Recent Questions, Troubleshooting & Support

You may have to replace the cord reel assembly, but first check the cord real release mechanism to see if it may be stuck or broken.

There's almost always a screw in the back (heel) of the iron, just behind where the cord enters. It might be a Torx or clutch head vs, straight or Phillips.

The Mr Coffee web site has the manual on the product page: http://www.mrcoffee.com/coffee-makers/mr.-coffee-optimal-brew-10-cup-thermal-coffeemaker-black/BVMC-PSTX91.html . Click on the Service and Support tab. The direct link to the manual is http://demandware.edgesuite.net/aamb_prd/on/demandware.static/Sites-mr-coffee-Site/Sites-mr-coffee-Library/default/v1426159971356/documents/instruction-manuals/BVMC-PSTX91_43_72624326.PDF . (You'll need Adobe Reader or a similar program to print the manual.) The Clean light will come on when the Clean button is held. It won't go off until the cleaning cycle is complete; it's completely automated. You need 4 cups (20 oz.) of white vinegar or the Mr. Coffee Cleaner (diluted as directed on the package). Make sure to remove the water filter disk from the unit before cleaning. Pour the vinegar or cleaning solution into the reservoir into the reservoir. Put in a paper coffee filter or the permanent filter into the brew basket and slide it into place. Put the empty decanter in place. Now you should press the Clean button until the Clean light comes on. The unit should slow brew 3 cups of the cleaning solution and then pause for about 30 minutes while the Clean light remains on. It should then brew the remaining solution. After the cycle finishes, the Clean light should go off. Afterwards, you need to empty the decanter and rinse it with clean water. Fill the reservoir with fresh, clean water. Then replace the decanter. The cycle could take an hour. I hope this helps. Cindy Wells (some brewing systems light the Clean lamp when it's time to clean the unit after lime deposits build up. To my knowledge, most of the Mr. Coffee brewers do not.)

Need an English Manual

Make sure that the Iron is unplugged from the Mains socket. From a Paint shop / Hardware shop.get some Turpentine. Wet a soft cotton cloth with Turpentine and gently wipe the iron surface in a circular pattern. You might have to wet the cloth a few times and the color will come off.
After the color comes off wipe the teflon area with a liquid dish washer solution to remove all traces of turpentine.Wipe clean several times and then heat up the iron to full temperature( Max: temp ) and iron an old cotton cloth to remove the traces of soap and turpentine ( and also the smell ).

The bags are the PBFC-6...I can't find them on the internet or in the stores

Hi ah621,

This is the link to your Sunbean Manual

Sunbean Bread Machine Model 5841 Manual

Once you open the website click Download the Document.
Don't worry i also try to download one on my own to ensure your safety and document is virus free.

Hope This Helps ^ ^

Webby101