Sony ES - Recent Questions, Troubleshooting & Support
How i cotrol the verlical vibration of sony lcd 32 inch model,,,KLV-32BX300
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
I have sony LCD Tv klv-32bx300.when turn on the tv
I have a tv sony lcd klv32bx300 when turning on works for about 15mins then sfhuting down and blinks 3times the red led on standby signal . Then stop for 2sec and again blinks 3times. I bought this tv in the middle east but we are h ere now in phils. I br ought this problem here in sony service center but the cost to repair this problem is half of the price when i bought. Any one can help to fix this problem
Unable display
It sounds like the LCD backlight is done for. You're going to have to take it in for service to get the backlight replaced.
Not finding what you are looking for?