Sony BRAVIA - Popular Questions, Answers, Tips & Manuals
Sony Bravia 46 XBR has the input bar stuck at the top of screen.
Unplug the TV for a while and hopefully, that should reset the circuity. If you're using the original remote control, check for the display button and press it.
I would also suggest doing a factory reset if your TV has that feature and if the TV allows you to do it after unplugging it.
Sony bravia kdl-40v5500 tv turns off and on
moved you out of computer repair it is not one.
first off the
remote can be failing !!
first try fresh new batteries
also if kids spill drinks on the remote the buttions can fail
even turn on , not touched.
turn TV on , and move the remote to farthest room. see if TV stays on.
or turn on TV and remove remote battery fast.
ok now, yes/.no//
some TV have no on button or is the only one on the TV,
I really do not want to read your manual
but if there that button on TV> (on/off)
remove the remote batteries
then turn TV on with its only button, on side of TV
cured?
super simple tests, to do no? and super effective facts learned and even cures based on results.
ok read you manual see googled in 5 seconds
and yes center right bezel LCD had
Press
1
on the TV to turn on the TV
any remote abuses or got wet will fail.
easy,
take out the batteries, push 1 above.
Sony TV model # KDL55HX800- no sound/no picture. 3.3 volts and 12 volts seems to be OK . Relay clicks on/off on power board. What shold I look for ?
- buy the service manual yet?
- get a real shop TV to fix it?
- what to look for in this complex mess really? well lots.
- all DC supply rails not just 2.
- Screen dead make sure LED back lamps have DC power.
- does flash light pointed to screen show data/??????
- no sound but gee lacking a screen how would you find a sound source input. hard no? yes. a mp3 file on USB"
- its not just dead clicker battery is it?
- this tv uses 167watts of power old is it? 2010 made. 12 years old it is. but is LED back lamp'ed I think.
- connect DVD deck player via HDMI and put in DVD and push play on deck and hear sound now?????????? hummmmm
- below RIGHT BOTTOM TV SIDE TURN OFF POWER SAVINGS?
- THERE IS 2 POWER ON BUTTONS 1 TV , 1 REMOTE BOTH FAIL>? AND SAVER BUTTON TRY BOTH MODES? YET.
- turn up volume and try playing DVD? fo sound works Backlamps are dead?
- The TV will indicate any problems with the STANDBY indicator flashing in reD and is a code. does it.
- the LED driver board bad or power to it is dead. (LED back lamps)
- and vastly more , any board that kills power DC or data then the screen goes dead.
I need to remove the back off a Sony Bravia KD-48X81J
The front and back pieces are like a clam shell and are compression fit with tabs into one another. You need to use something like a guitar pick or spudger to separate the pieces. Dont use metal objects due to damage that will happen to the plastic .
My SONY BRAVIA KDL-46VL130 FB3 board has a flashing light on it. What's it mean?
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
https://homenol.blogspot.com/
https://elektrotricks.blogspot.com/
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty. Search the sites by type in the brand name of your set, in its search box at the right column. View it on a desktop or in web View by mobile. Mobile view has no search box.
Not finding what you are looking for?