Sony BRAVIA - Recent Questions, Troubleshooting & Support - Page 4

hello Dear this is panel problem please replace panel Thanks M Nasir

You will need a code in order for the tv functions of you sky remote e.g volume to work.

Click here to find out what remote control version you have.

If you have a remote control was produced after 2002 or there is no sticker

click here to use Sky's code look up tool.

Most SKY+HD Remotes are produced after 2002

https://www.youtube.com/watch?v=HeGBaPnzzmo

Aron, To perform a reset you will need to disconnect the TV completely from power for at least 30 seconds, if this doesn't resolve your problem then you may have hardware that has expired in your device. Without physically looking at your device I can't say with certainty what your problem is, it could be your PCB. There are video's online you can visit on how to test a PCB for faults. If you are not comfortable troubleshooting your device I would suggest contacting a local electronic repair shop near you, however I will link you to a generic instructional video showing you how to perform basic troubleshooting of your device. Hope this helps, Best regards https://www.youtube.com/watch?v=qxG3hmmvkJs Testing LCD TV Power Supply BoardsSTEP BY STEP

Although I am just guessing, most Sony equipment uses metric screws. Go to a Home Depot or similar store and take the piece that you have that contains the threaded fittings and they will help you find the screws you need. https://www.manualslib.com/manual/793567/Sony-Kdl-32xbr6.html?page=7#manual This page of the manual gives some info about the screws such as not longer than 1/2" (or 12mm) to prevent damage to the set. Sony customer service may be able to supply replacement screws too.

Replaced circuit board under warranty.

If you already name the subtitle file (.srt) with the same name of movie file (avi, mpeg, mkv etc) all you have to do is press green button on the remote control the turn on/off the subtitle. It works for me.

Unplug from wall for 60 secounds then plug back in. See if that works.

Press the HOME button on the remote control. Select Settings. Select System Settings. Select Customer Support. Select Factory Settings. Select OK.

It is an attempt to get people to post a question here and hopefully get help--it also generates hits for the site--When searching try to word the search to avoid what you do not want--some will Google looking for a owner manual when should Google with model number and just "manual".There are other forums on the net but it can take time when searching to use the right keywords(search engines will find this site as it keys on many specific words).As an expert who answers questions here (average of 300 a week for free) the other side of the coin is many post questions here with little or no basic information--brand-model number--clear description etc.I had someone looking here and over the entire internet for a owner manual or explanation of why remote and keys on set would not function--no brand or model--when asked told me had manual but nothing in there helped--took a few minutes to locate that owner manual and on page 29 was the info he needed---told him and also commented nicely--if all else fails read the manual.Reply within minutes was--OPPs and thanks--problem resolved.Not all problems can be solved or answered depending on equipment or number of experts available.If you have a TV with a problem feel free to post it here Attention SD TECH with brand,model and as good a description as possible and I will attempt to help.SD TECH

More information is required. Your backlight is lit (screen not dark) but I need to know what you have connected to the TV (your sources) and how they are connected. Does the menu/OSD (on screen display) work?

panel source board is defective in this case complete panel changed because source board is part of panel

here's blink codes for sony bravia


1 blink abnormal AU Power Voltage
2 blink abnormal d5v/a9v power voltage
3 blink Abnormal panel voltage
4 blink backlight failure
5 blink abnormal main power voltage
6 blink abnormal speaker voltage
7 blink internal temp. rise
8 times ic5000

that helps?..

Check for loose contacts in power outlet, RC cable, jack and socket.In order to ensure, it is not caused by the input device, connect a DVD player and see.

Yes ,you should replace the main board ,because you can'nt repair HDMI interface. Abctay.com Wholesale tv parts,include TV power supply board, logic board, TV LED screen

If the line is present in all inputs and modes, there is a problem with the LCD Panel. The only way to fix it is to replace the whole LCD Panel which is very expensive (usually around $1000+ for 40" Sony). Unless the TV in under warranty, it is usually around the same price for a new TV.

Five times blinks to Sony Bravia is related with an IRK error. It is related to its main digital board. In most cases, the main board might need replacement. It will be best to contact the authorized service center for Sony. If you're sound in electronics, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up previous posts there, either by type in the model name to your set in its search box, or view it in Mosaic /Timeslide option.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience.

07107.

Most language options on electronics are found under "Settings"Switch onMenuSettings PreferenceLanguage