Samsung HL - Recent Questions, Troubleshooting & Support - Page 2

http://guides.fixyourdlp.com/samsung/bp96-01579a.php

Light Engine assemble problem

Sounds like the color wheel is not turning properly. I would recommend calling 1-800-samsung to set up repair with an authorized service center. I would not try to replace it yourself. The part costs $120.00- $180.00.

I don't believe the manufacturer is covering this any longer, but you can try calling Samsung support at 1-800-726-7864 Call 1-888-899-7609 Mon. - Sun. 9am - Midnight (EST) Hearing-Impaired (TTY) 1-888-899-7608 Mon - Sun : 9am - 6pm (EST) Home Appliances Hours of Operations Mon - Fri : 8am - Midnight Sat : 9am - 5pm Sun : Closed Laptop, Printer, Galaxy Tabs (WiFi only) 1-800-SAMSUNG (1-800-726-7864) Mon - Sun : 24hrs the part# for your DLP chip is : 4719-001985 see the following web site: http://www.samsung.com/us/support/contact the

main pcb approx $72.00 at http://www.shopjimmy.com/samsung-bp94-00434a-main-analog-board.htm however thay are out of stock. Be sure this part # is a match to your complete model# B4 trying to order, this site lists the various models this pt# fits.ALSO considering the age, they may not be able to get anymore of these.I recommend calling to confirm. As for firmware updates, that info can be found at Samsung web site: http://www.samsung.com/us/support/contact under product support. you might also check at the Samsung web site for the Main PCB. expect it to be much higher & please have your complete Model & Serial numbers available when you contact anyone.

The DLP chip needs to be replaced. Samsung is aware of this problem and will probably cover the cost of part and labor. call 1-800-samsung for nearest service center. I replaced the chip on a 3 year old machine yesterday and Samsung covered all costs.

Yes, It is problem with DMD module in light engine that will be replaced.
Hope Samsung will help you in replacement. Please update about outcomes.
Thanks.

Is your TV a SAMSUNG DLP TV Model HLN437W Rear Projection Digital HD?
If so I found a TROUBLESHOOTING GUIDE @
http://support-us.samsung.com/cyber/popup/pop_troubleshooting.jsp?ia_cd=02010300&model_name=HLN437W

A probably INTERACTIVE ONLINE SERVICE REQUEST FORM @
http://www.samsung.com/us/support/repaironline/supportOnlineServiceRequest.do

PHONE #S FOR SAMSUNG:
mobile phones: 1-888-987-HELP(4357)

• Mon - Fri : 7am - 9pm (CST)
• Sat : 9am - 6pm (CST)

digital HDTVs: 1-800-SAMSUNG (1-800-726-7864)

• Mon - Sun : 9am - Midnight (EST)

printers: 1-800-SAMSUNG(726-7864)

• Mon - Sun : 24hrs

IT Products for Business: 1-866-SAM4BIZ(726-4249)

• Mon - Fri : 9am - 9pm (EST)

All other products: 1-800-samsung (1-800-726-7864)

• Mon - Sun : 9am - 9pm (EST)

To see PHOTOS of REPLACING a SAMSUNG DLP TV ballast go to:
http://forum.doityourself.com/electrical-c-d-c/248376-testing-ballast.html

Hope this is helpful.

Good Luck!
Jack iaria

Here is photo step by step replacement of color wheel.
http://guides.fixyourdlp.com/samsung/bp96-01579a.php

Hope this helps

Bad Color Wheel.will cause this and it is a common problem for DLP Samsungs.
Part number is BP96-01103A
Samsung Parts 1-800-627-4368

Do you mean you have power between the grounds of the HDMI ports...if you measure the metal part of the connector to frame ground you get a voltage reading?

you either have incorrect placed or bad avi cable lastly could be a dmaged main board in the TV since other connections such as hdmi work fine focus on the avi device your connecting and test it o another tv with the current cables i bet it is not the TV

hi sounds like dpl ic chip is faulty thanks

your problem is most likely not the Tv i bet you are using an air antenna arent you