Samsung Refrigerators - Page 2 - Recent Questions, Troubleshooting & Support

would need complete model #

The versions are the software and firmware adjustments. Always replace like for like, that will avoid issues.

I would power it off, wait for 5 minutes and plug it back in. If the logic board has frozen, that will reset it.

Unplug for 5 minutes to see if it'll reset to foctory setings.

Question edited for clarity and typos. Question moved to maker category. Duplicate questions deleted. Refresh page to see your question. It sounds like the ice level sensor. when that rod is covered in ice, the system shuts off. Google samsung model parts diagram https://www.google.com/search?q=%E2%80%8Bsamsung+model+parts+diagram ..

HOLD THE "ICE OFF" FOR "5" SEC. IT WILL UNLOCK.

Question edited for clarity and add full make and model. Lots of ideas in the link, videos and articles. https://www.google.com/search?q=Samsung+Smartcare+Steam+Dryer+Model+DV50F9A7EVP.+dryer+is+not+drying+clothes ..

Your fridge is no longer working and you need to buy a new fridge.

We need a Model Number to assist you.

never buy a samsung appliance because you can not repair them. the company would like for you to buy a new one . my fridge the rs265labp freezes up in the fridge section and i have to take it apart once a month to defrost it. but i did find that if you keep a couple of boxes of baking soda in it and replace them often it helps to make the time between defrosting longer. hope this helps someone. i hope that samsung either goes out of business or straightens up

The flickering display on your Samsung fridge model RL43WCIH indicates a possible issue with the control board or the temperature sensor. The fact that the on and off button is not working may indicate a power supply problem. Here are a few steps you can try to troubleshoot the issue:

1. Check the power supply: Make sure that the fridge is plugged in and the power outlet is functioning properly. Try unplugging the fridge for a few minutes and then plugging it back in to see if that resets the control board.
2. Check the temperature sensor: If the temperature sensor is faulty, it can cause the display to flicker. You may need to replace the temperature sensor if it is damaged or not functioning properly.
3. Check the control board: A faulty control board can cause a variety of issues, including a flickering display and unresponsive buttons. If the control board is the problem, you may need to replace it.

If these steps do not resolve the issue, it may be best to contact a professional technician to diagnose and fix the problem.

If the ice maker on your Samsung RF18HFENBWW refrigerator continues to turn on and off despite not being hooked up, it's possible that the switch or sensor controlling the ice maker is malfunctioning. You may need to replace the ice maker assembly or have a technician look at it. In the meantime, you can try turning off the ice maker manually by following these steps:

1. Open the refrigerator door and locate the on/off switch for the ice maker. It should be located on the control panel inside the fridge.
2. Switch the ice maker to the "Off" position.
3. Unplug the refrigerator from the electrical outlet for 30 seconds and then plug it back in. This will reset the control panel and may help stop the ice maker from turning on and off.

If these steps do not work, it's best to contact Samsung customer support or a qualified technician to diagnose and fix the issue.

https://www.google.com/search?q=Samsung+RF28HMEDBSR%2FAA+beeping+and+energy+saver+light+on

Samsung Refrigerator Randomly Beeping - What Causes ...

https://removeandreplace.com > ... > Refrigerator Repair Jun 9, 2018 - My refrigerator keeps beeping/alarming all day long. The Energy Saver icon comes on and off all day long - and the beeping is driving us crazy. ..

Dense closed cell foam would be even more effective. you are the only person with this issue, so I wonder if you have something missing thrown away on installation? https://www.searspartsdirect.com/model/2nfol91qi9-001482/samsung-rf26j7500sr-aa-00-bottom-mount-refrigerator-parts https://www.google.com/search?q=samsung+RF26J7500SR+noise+from+ice+dropping ..

The SRL709EVSS is a Samsung refrigerator model, but unfortunately, since it's an older model, some parts may have been discontinued by the manufacturer. To get the correct part numbers for the heater, sensor, and frost kit element for your specific model, I recommend contacting Samsung customer support or an authorized Samsung service center. They should be able to provide you with the necessary part numbers and potentially offer alternative solutions if the original parts are not available. Additionally, it's worth noting that the frost kit element and heater are not the same thing. The frost kit is typically a component that is used to prevent frost buildup in the freezer compartment, while the heater is responsible for defrosting the evaporator coils.

If your Samsung RF220NCTAWW freezer is too cold, there are a few possible causes and solutions:

1. Check the temperature setting: Make sure the temperature setting is set to the recommended level, which is typically between 0 to -5 degrees Fahrenheit. If it is set lower than recommended, adjust the setting to the recommended level.
2. Check the door seal: A damaged or poorly fitting door seal can cause the freezer to be too cold. Check the seal and make sure it is clean and undamaged. If it is damaged, replace the seal.
3. Check the thermostat: A faulty thermostat can cause the freezer to be too cold. Test the thermostat using a multimeter to determine if it is functioning properly. If it is not functioning properly, replace the thermostat.
4. Check the defrost system: If the defrost system is not working properly, it can cause the freezer to be too cold. Check the defrost heater and thermostat to make sure they are functioning properly. If they are not functioning properly, replace them.

If none of these solutions work, you may need to contact a professional appliance repair service to diagnose and repair the issue.