Popular Questions, Answers, Tips & Manuals - Page 8

0helpful
2answers

We have a USI laminator. The rollers are not feeding. They are not moving at all front or back and just stopped suddenly. Do you know what could be causing this?

There are a few things that could be causing this to happen: If you have a USI CSL or USI ARL roll laminator and did not engage the drive switch for 60 minutes, the automatic shut-off timer may have turned off the heat shoe or heated roller.
2/28/2024 3:15:32 AM • Cell Phones • 45 views • 0 helpful votes
0helpful
1answer

Telefunken tv model Tledd-42fhdb doesn't show pictures after my girl pressed red button on the remote

Press the red button again to toggle off.
3/16/2024 7:52:05 PM • Televison &... • 31 views • 0 helpful votes
0helpful
1answer

2004.5 chevrolet silverado 2500hd 6.6L LLY - transmission problems

The oil cooler runs through the radiator and when damaged can exchange fluids.
4/2/2024 11:16:01 AM • Chevrolet Cars &... • 23 views • 0 helpful votes
0helpful
1answer
0helpful
2answers

Hi! can i use xD 2GB TYPE M+ CARD WITH OLYMPUS STYLUS 300 DIGITAL?

  • The Olympus Stylus 300 camera works with xD-Picture cards, including the 2GB Type M+ card. But it's important to make sure the camera can use that particular type and size of xD card by checking the camera's specifications and list of compatible devices.
4/2/2024 10:37:02 AM • Olympus Cameras • 23 views • 0 helpful votes
0helpful
1answer

Fs55rc trimmer has no compression? Any help would be appreciated? Thanks

Suggest a cranckcase leak test to locate leak(s) other than rings. You need to seal the intake and exhaust ports and pressurize the crankcase via spark plug hole. No special tools other than an adapter from sparkplug hole to compressed air. The intake and exhaust ports can be sealed with pieces if old bicycle inner tube between carb and port and muffler and port. Then apply 5 to 10 psi to spark plug adapter. Spray case seams and shaft seals with WD40 or soapy water to locate slow leaks.Search "two cycle crankcase leak test" for videos.
4/2/2024 9:58:35 AM • Stihl Garden • 23 views • 0 helpful votes
1helpful
2answers

Does a Chrysler neon 2001 have a separate TCM from pcm? If it has, where is it located?

In this model, the TCM is often located near the transmission, mounted on or near the transmission housing. However, exact locations can vary slightly depending on the specific vehicle configuration. It's advisable to consult the vehicle's service manual or a qualified mechanic for precise information on locating the TCM in your specific vehicle.
4/2/2024 5:50:40 AM • Chrysler Cars &... • 23 views • 1 helpful votes
1helpful
1answer

Why does the engine turn over and stop like the battery or starter is bad? How do I adjust the valves on a Craftsman riding mower 17.5 HP engine?

Hello Joe How old is the battery? Battery life in mowers is bad because they usually aren't well looked after in the winter, 6 months use and 6 months neglect. Also fuel is often left in the tank and in the carb which goes funky. Do you have a compression tester? Valve adjustment https://www.google.com/search?q=craftsman+riding+mower+17.5+adjust+valve+clearance ..
2/28/2024 6:28:22 PM • Craftsman Garden • 44 views • 1 helpful votes
0helpful
1answer

My gwm steed 3 just stop anytime no power to system only start and lights to dash when it remove batry to reset ecu

If your GWM Steed 3 is experiencing sudden power loss and only starts with dashboard lights, it could be due to various issues. Check the battery, alternator, and fuses for any issues. If problems persist, consulting a professional mechanic would be advisable to diagnose and address the specific problem.
3/11/2024 7:18:52 PM • Cars & Trucks • 34 views • 0 helpful votes
1helpful
1answer

My kb 250 4ja1 fuel guage, speedometer, tempreture guage and rev counter stopped to work at the same time what could be the problem and how to fix itand

One has to check the fuse for Instruments. When it failed you check any cable for wear marks and the chance it shorted out against some ground. Next the main plugs for power to be in good condition and not being corroded. Sometimes the cables break where they are clamped on a cable lug and one can then easily pull them out of a connector. It can be a bad connection to ground, where ground cables connect to a larger wire. Ignition switches can fail and have connections for many functions with plugs down below. It should be any of these causes.
4/14/2024 8:27:34 PM • Isuzu Cars &... • 19 views • 1 helpful votes
0helpful
2answers

HP Deskjet F2480 All-in-One Printer. How to find the IP address of my printer HP Deskjet F2480 series please?

Question edited for clarity 'make model (what it is)'.

Find the IP address for an HP printer

Hewlett-Packard https://support.hp.com > ish_6039801-6039767-16 Find the IP address for an HP printer ; HP Smart app: From the app home screen, click the image of your printer, and then click Network Information to find the . ..
4/14/2024 2:10:48 PM • HP Office... • 19 views • 0 helpful votes
1helpful
1answer

My ecco tv cant sign in Netflix and its showing massage update required but doesnt have option to update

This message indicates that your browser, operating system, or device needs an update or may no longer be supported by Netflix. Your path to recovery may take in two directions. You try updating each of the aforementioned three areas and if that fails, you contact Netflix support. There is no way to predetermine which of the three areas is the problem. If you're using the Netflix app directly on your TV, it might need an update. Here's how to do it: From the taskbar or Start menu, open the Microsoft Store. Click More > Downloads and Updates. Locate Netflix and click Download to update the app. Once the update is complete, try accessing Netflix again. Even pointing out that not all browsers support Netflix doesn't mean that is the problem. The following browsers and versions support Netflix:
  • Safari(version 11 or later) forUltra HD (2160p)streaming.
  • Chrome(version 106 or later) forFull HD (1080p)streaming.
  • Edge(version 118 or later) forHD (720p)streaming.
  • Firefox(version 111 or later) forHD (720p)streaming.
  • Opera(version 92 or later) forHD (720p)streaming.
4/7/2024 9:22:08 AM • Option Computers... • 21 views • 1 helpful votes
0helpful
3answers

I put the battery wrong electrodes , the smoke come out from alternator. Fixed it, car won't start, appeared anti-theft signal on panel. Model: Wj 4.7l

I would suspect the engine management block. Take it to a dealership for specialised repair as electronic parts get destroyed with incorrect polarity. This will be expensive!
4/14/2024 7:13:58 AM • Cars & Trucks • 19 views • 0 helpful votes
0helpful
2answers

My Telefunken television model TLEDD-42FHDB remote made tv on/off switch flick and remote has stopped working now. Still doesn't work after replacing batteries.

Put the batteries back in and aim the front ot the remote at the front facing selfie camera on a smartphone. Press a button and you should see a flash. If no flash, the remote has failed. If there is a flash, the television IR module or main board has failed.

Telefunken Replacement TV Remote TLED-26FHDPA

Soundtech https://soundtech.co.za > telefunken-replacement-tv-rem... Telefunken replacement remote compatible with TV models: TLCD-29FHDP TLCD-32FHDA TLCD-32HDA TLCD-37FDHA TLCD-37FHDA TLCD-39FHDP TLCD-40FHDC TLED-26FHDPA ZAR 199.00 ..
4/10/2024 1:53:03 PM • Televison &... • 20 views • 0 helpful votes
1helpful
1answer

1995 Buick Roadmaster. Both fans are running when starting and relays heating up under the hood. Any suggestions please?

Question edited for clarity. Question moved to model category. It sounds like the relays are permanently closed circuit, so the contacts are fused together and the solenoid coil inside is burning up. It can also burn up the female contacts in the base. Test and swap them out, before the fire. Take the leads of the multimeter and connect them across the coil terminals of the relay. For a normal coil, the multimeter should read anywhere between 40? to 120?. If the coil is damaged i.e., it is open, the meter shows out of range and you have to replace the relay.

How To Test A Relay With A Multimeter? - ElectronicsHub USA

Replacements https://www.google.com/search?q=1995+Buick+Roadmaster+fan+relays ..
4/14/2024 3:03:20 AM • 1995 Buick... • 19 views • 1 helpful votes
0helpful
1answer

2006 Mercedes-Benz S350. HOW TO GET THE KNEE BOLSTER DOWN TO CHANGE THE BRAKE LIGHT SWITCH.

Question edited for clarity. Question moved to model category. Please don't type in all CAPS, it is considered SHOUTING and is harder to read. Help and videos in the link https://www.google.com/search?q=2006+mercedes-benz+s350+replace+brake+light+switch ..
4/14/2024 2:37:23 AM • 2006... • 19 views • 0 helpful votes
Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...