Philips Televison & Video - Page 4 - Recent Questions, Troubleshooting & Support

HelloSetup codes to check with Magnavox TV to Magnavox remote control are:002 009 109

118 209 309 402 408 502 508 510 807 914 917OK.

Press the "Volume Up" and "Volume Down" buttons at the same time to make the menu appear. check the user manual https://www.download.p4c.philips.com/files/7/70pus7505_12/70pus7505_12_dfu_eng.pdf

back light drive pcb defective.

LED backlighting is found on the majority of flat-panel LCD TVs. LED lighting is brilliant, small, and energy efficient, but it has a cool color temperature that gives it a little blue tint. When seeing a white image, this feature is most visible, and when viewing other colors, it is considerably less noticeable.

Anon, Philips Magnavox Learning Universal Remote codes Welcome to Remote Central Universal Remote Control Reviews More How to Program Universal Remote Codes for Universal Remotes http://www.remotecodelist.com/

Apparently this is a known issue. Some dvp642 players have compatibility issues with some of the Disney DVD's. A firmware update might help. There is a discussion of this at: http://www.videohelp.com/forum/archive/t317193.html

Can you provide the model of DVD/VCR player? Not all models do this.

For the ones that can, you need to use the Dub feature. Put a blank DVD (or one with sufficient space) in the DVD tray; initialize the disc if you are using a rewritable disc (RW). Then put the VHS tape into the VCR (you may want to break off the write protection tab). Then set the unit to VCR mode and forwared the tape to the desired recording point (copy-protected tapes can't be copied). Then some models have a dub or copy button on the unit and/or on the remote (press it and follow the onscreen prompts to select VCR to DVD, recording quality and press Enter to start). The copying will stop when you press Stop or run out of space on the DVD. On some models, you need to do this with the on-screen menus. For those, the look for a Dub feature (where it is will vary in the menus - usually in the same submenu as timed recording) and then select VCR to DVD and the rest.

I hope this helps.

Cindy Wells
(I'll be glad to provide more information if you provide a specific model. I've worked with several brands and there are some differences in the setup routine. My current unit is a Zenith with a Copy button on both the front panel and the remote.)

I have a DVP3005 too, and this works for a while. Then suddenly jumps back 1 chapter. Then plays for ? little while, and jumps back one chapter again. I thought it might be a temperature problem(the prcessor was very hot), so I took the lid off and cooled it down, but the error came back. I have dismantled the front PCB, and it is not a problem with the switches, and it is not the remotecontrol that causes this error. Is it worth troubleshooting? [email protected] Norway

Normally your television only detects signals from a Source, the HDMI Input, a Coaxial cable or RCA composite video. Your channel selection come from the Cable box or the Satellite box.Make sure your boxes are powered on. On the remote, try scrolling through the Source or Input button. If that doesn't work, switch off all the connected devices, and unplug them from the wall. Also remove and replace all Input cables and replace them straight away to ensure a good connection. Plug everything back in and try again.Does a Video or DVD work? It is a nice set. Also make sure it is connected to the Internet.https://www.usa.philips.com/c-p/65PFL5603_F7/5000-series-smart-ultra-hdtv-with-net-tv-and-high-dynamic-range..

it could be stuck by dirt, try VERY VERY DELICATELY prying it open with a small flat screw driver, if it opens look for any dirt or debrie that could make it stick

Cheers!

DVD players cannot play Blu-Ray discs. Most Blu-Ray players have DVD support, which means they can play DVDs as well as Blu-Ray. Unfortunately, the DVP3982 is not a DVD player, not a Blu-ray player, therefore it cannot support this format.

Question edited to fix all the errors. Question moved from Smart for Two - Cars and Trucks! Unlikely you will be able to get it to work, batteries, Integrated Circuit chips and water don't mix. It causes irreversible short circuits. You can try and take it apart and dry it out, but likely the damage is done. Google make model replacement remote DON'T buy a universal, buy one for the model you have. https://www.google.com/search?q=Philips+smart+television+Remote+replacement ..

Where did u bought this DVD player?US,Canada,and Mexico?The DVD disc. used NTSC region format.Asia,Europe,Africa,and the Middle East.The DVD disc. used PAL region format.They can't be mix or it will not play as u find out.If u move in and out to another region of the world.U must have a regions free DVD player to play either NTSC or PAL regions.

Can,t be done with the one you have,

check the region code of the dvd that u bought...if its not according to your country region code then the dvd would play only in laptops and pc dvd drives..u can contact the service station of philips and ask them to unlock ur dvd player so dat it becomes region free..i had the same issue with my dvd player

Bad backlights

It could be or it could be the main as well. Do you still have sound or does it go to just standby light?

This states that that remote is not a Universal remote but then contradicts the statement. https://www.amazon.ca/Genuine-Philmore-PM-RC6-Remote-Control/dp/B01JJBGNCE These are the Sanyon codes. The first one is the most common. The universal code for most is 049 for a Sanyo TV Brand Code SANYO 2 more rows

universal remote codes for sanyo tv - DirecTutor.com

Here is a photo of the board where I have removed the two from my TV. You can see the two open holes.

There are companies that will sell you the code for a small fee. If the radio was OEM equipment that came with YOUR car, your dealership will give you the code based on your VIN Number. https://www.google.com/search?q=philips+ccr600+code+generator ..