Panasonic Televison & Video - Recent Questions, Troubleshooting & Support

Probably an open internal fuse or power supply failure

Panasonic... | Answered 2 days ago

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}

Panasonic... | Answered 3 days ago
Three Blinks: Three blinks of the power LED indicates an over-current or over-voltage condition in one of the DC supplies of the AP board. The AP board is repairable. Therefore the use of an ohmmeter and peak-hold-voltmeter is required to determine the cause of the shutdown. An over-voltage condition is definitely a defect of the AP board. An over-current condition may be due to a short circuit located in the APh

board, A board, or the LCD panel.

Panasonic... | Answered on Jan 12, 2019

I hate to give you the bad news but that's a 2005 model and it wasn't exactly a high-end one. It would be cheaper to simply to go get a new one. Sorry

Panasonic... | Answered on Jan 11, 2019

To output audio, use the stereo cable to connect the camcorder to the TV (insert terminals other than the yellow one). 3. Turn on the camcorder and the TV. On the TV, select the component terminal to which you connected the camcorder as thevideo input.22 Jul 2010

Panasonic... | Answered on Jan 10, 2019

Use code search on your Magnavox URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

Panasonic... | Answered on Jan 10, 2019

Subtitles come from your cable or satellite box, so look on the remote for that device rather than the television settings. Google

make model of box, remove subtitles

Panasonic... | Answered on Jan 08, 2019

VXY1814 DVD RAM DRIVE 437.53

Panasonic... | Answered on Jan 08, 2019

Order the service manual directly from Panasonic.

Panasonic... | Answered on Jan 06, 2019

I suspect the DMR-BWT460GN has a weaker tuner than the DMR-BWT700. You can try moving your antenna. If it's outside, try a taller mast and make sure to check that the antenna hasn't rotated a few degrees on the mast. If you have an indoor antenna, switch to an outdoor one that is as high as possible.

If the transmitters are in different directions from your location, you can try combining the signals from two antennas pointing in the different directions. Alternatively, try an antenna rotator to move the antenna to align with the transmitters, as needed. (There are some that are automatic and change direction when you change channels.)

I hope these ideas help. Unfortunately, the only other option is to try and find a recorder with a better tuner. That would require trial and error testing with multiple boxes due to manufacturing issues.

Cindy Wells

Panasonic... | Answered on Jan 05, 2019

Check the website for The blu rayplayer.

Panasonic... | Answered on Jan 04, 2019

you have tripped the tv's safety power down feature, try unplugging the tv for 15 mins to an hour then try to turn it back on, if it still ceases to function, the tv will need servicing.

Panasonic... | Answered on Jan 03, 2019

You have burned an internal fuse on the main power board. There are 2 right next to where the main power line plugs in ( after the noise filter ). Yes, you will have to unscrew the rear plate to get to it ( about 24 screws ). You just follow where the lead goes from the plug - you will see where the fuses are - right next to where the plug mounts to the power board. To check this set your meter to ohms and check for continuity - odds are one of the two fuses is done. THIS IS A PANASONIC SPECIFIC FUSE - it cannot be replaced with one that looks like it or fits the same slot. This fuse is a time-delay slow burn fuse and replacing it with anything other than the correct type will cause more damage and possibly total the unit. The panasonic part number is K5D802BNA005 and is available from several parts retailers - just google "panasonic part K5D802BNA005" and many reputable firms will come back on the search. They cost approx. $1.95 US ( so the shipping is probably 7.00 more ) Hope this helps and be careful of the internals and static electricity from your body.

Panasonic... | Answered on Jan 02, 2019

Not finding what you are looking for?
Panasonic Logo

Family Lines

25,927 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts


Level 3 Expert

5650 Answers


Level 3 Expert

509 Answers

The Knight
The Knight

Level 3 Expert

76016 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides