LG Washing Machines - Page 7 - Recent Questions, Troubleshooting & Support

The small black tube needs to be replaced and the hose needs to be replaced for the washing machine part and the duct and the air vent could be having to be replaced for the dryer or the heat is not working properly.

Mildew is caused by leaving the machine damp and with the lid closed. You should dry the machine after every use. Once you have it is it hard to get rid of it. Vinegar is not good for the removal of it. Boil washes with bleach is a good solution. Also, go to Home Depot and get a bottle of Tilex. Spray it all around the inside of the machine and leave it for a couple of hours. Then do it again and leave it overnight. Then do a wash. Tilex is made specifically for mold and mildew on tiles.

It is either bacteria or grease or and mold. From the website called White Goods Help this build up here of grime can be caused by the result of multiple problems happening when you are washing your clothes from using environmentally friendly soaps.

The drum may need to be replaced inside of the washing machine. The washing machine is making a loud noise while spinning then especially if it is either a clanking or scratching sound then there is some type of foreign material that could of had have gone into your washer's filter inside the rubber seal or is simply spinning around inside of it's the drum.

If the washing machine does stop at the rinsing cycle and will not continue , It could have something to do with the machine's timer not working correctly . If the timer is broken or is not working it will have to be replaced to make sure that the machine can be able to run through the rinse cycle again.

Question edited for clarity An LG washer displaying the UE or uE error code means that the load in the washer is unbalanced. ... When the uE error code is displayed, it means that the washer is trying to resolve the issue. The washer will fill with water to try to balance the load. It will then drain and try to spin again. Jun 7, 2021

How to Fix the LG Washer UE Error Code - Fleet Appliance

https://fleetappliance.com > News and Tips

sounds like timer out of time

I did all the steps to ensure was right soap and amount, used cleaning tablets to keep odor down. I took it in my own hands and made an overflow and vent. Self explanatory with pictures. More than a year, no suds, no odors. the exit has a short incline to avoid normal splash and the fan on secondary catch chamber keep a constant low air movement. Two outdoor electrical boxes, fan, and pvc, I know, overkill.... Hope it helps someone.

My wife has been complaining that the bleach and fabric softener dispenser still had water in it after washing. After removing the top to the washer I found that there are 4 components to the dispenser. 1. the solenoid (part of a 3 solenoid bundle) for the cold water, 2 the controller to the solenoid 3. The hose from the solenoid to the dispenser, and 4. The dispenser. After checking that there were no kinks in the hoses. I checked the solenoid found it had power at the right time but the flow was low. I shut off all the water and disconnected the lines going into the back of the washer I found that the cold water filters were clogged. After cleaning them (there were 2 for each hot and cold) The washer worked correctly.

BAD TRANSMISSION

call a local repair service if it is old then plan to replace it

PCB Main board problem

Hi. Take a look here: Why Your Washing Machine Isnt Spinning And How To Fix It eSpares

No the broker foot is still attached to washer.

Question edited to add that it is an LG Washing Machine and not a Sump Drainage Pump. Question moved from Larry's Computer category. Please ALWAYS include 'make model (what it is)' in all questions. This model is very little known and parts are not available. The funky connector is so that you can only use LG spares. https://www.google.com/search?q=lg+wf-t1122tp+parts You would have to find a pump that fits and change the connectors on the washer to match the connectors on the pump. Normally insulated spade connectors.

the filter light is just a reminder. it is not connected to a sensor or anything. it is not the issue. the 'CL' code is the issue. CL means that the Child Lock is on. press and hold the child lock button for 3-5 seconds to turn off the child lock.

Try reducing the water flow supply.

There are several sources for the Owner's Manual. LG has it here: https://www.lg.com/us/support/products/documents/WM2487HRM.pdf . Sears Parts Direct has the manual for the WM2487HRM (and a few related models) here: https://www.searspartsdirect.com/manual/2ghnyqmryj-003204/lg-wm2487hrm-washer-parts . The direct link to the manual is https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/L0702355.pdf . ManualsLib also has it: https://www.manualslib.com/manual/1250343/Lg-Wm2487hrm.html . I hope this helps. Cindy Wells

If you google LG washer #WM2487HRM manual there are several sites. https://www.manualslib.com/products/Lg-Wm2487hrm-135172.html

What is the code number washing