LG INFINIA - Recent Questions, Troubleshooting & Support

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electro-medical.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

hi try a factory press menu on the remote and menu on the tv at the same time if this don't work try ok no the remote ok on the tv at the same time select reset thanks shaun

that HDMI spike and so the Motherboard needs to be changed and that is the only option.changed Mother board and all back to normal.

All y'all are wrong. It can be fixed. This is one of the only lcd with an actual GLASS front on top of the panel. I cracked mine and got it replaced for about $300

Hi there try 0000 kol run

Good evening to you. Try going to menu> picture>brightness> remember to push enter after each move. kolbrun

hi, the most problems when the tv need warm up are the power supply capacitors, you need disasembly the tv, tha bad cap are blow the top side o inflated. you need to be a electronic tech to remplace them.

Bad caps in power supply,Crack or splits on top of cap or leaking, Check value of caps in power supply.