Konica Minolta Office Equipment & Supplies - Page 4 - Recent Questions, Troubleshooting & Support
What is Error 0F54
Toner level cyan is bad. Replace the cyan image unit. and the Cyan toner
How to clear error Code FC22 in Konica Minolta c203?
Code is assigned to MFB (Multi-Function board). To reset power off wait 10 seconds power on. If code returns then MFB board is bad. Might try updating firmware. Have tech do that as Konica Minolta Firmware is located on a secure website. They have to protect there OS's software.
I have a konica minolta c8000 with error code c3106, what does it mean?
Open the mid section of the copier and pull out main section. Then re-install. The code mean the the fuser (The large device on the left hand side that melts or fuses the toner to the paper is not connecting properly to the electrical connections in the back where it plugs into. Could be that the connector is broken because some slammed the mid section to hard. Or that you need to give the section a better/some what harder push when you close it. Might want to remove the FUSER unit and put a flashlight to the back make sure the connector is ok and check the connector on the fuser itself!
What is error c2557
What is the model number? Ball park! replace the black developer unit and black drum
Not finding what you are looking for?