Printcopy.infohttps://printcopy.info > code=C-2402
Code: C-2402; Description: Erase lamp (EL) connector slip-off abnormality. - When EL turns ON before starting an initial charging, EL abnormality has been ...
Missing: press C6000 Pro.
You can try it, but the manual says 10 at a time via the Bypass tray. The problem is the fact that normal paper from the trays takes a rather tortuous route through the machine that contains sharp turns. By far the easiest way to print a lot of envelopes is to use Avery 8163 Labels. Use the Avery template and create the pages of addresses and print 50 at a time from the normal paper tray.
https://www.google.com/search?q=Konica+Minolta+Bizhub+880+print+9+x+12+envelopes
https://printcopy.info > model=bizhub+Pro+950
Code: C-0003 · Description: Main body drive serial input abnormality 3. Within a specified period of time after the power ON ACK, a serial data is not received ...
..
Description: Optical cooling fan motor's failure to turn
• The fan lock signal remains HIGH for a predetermined continuous period of time while the motor remains stationary.
Causes: Optical cooling fan motor (M202) Scanner relay board (REYB/SCAN) MFP board (MFPB)
Remedy:1 Check the FM201 connector for proper connection and correct as necessary. - - 2 Check the fan for possible overload and correct as necessary. - - 3 M202 operation check REYB/SCAN PJ4-3 (LOCK) P-18 4 Change REYB/SCAN - - 5 Change MFPB
Error code 001 is a generic service call error, and it could be related to various problems within the printer.To resolve this issue, follow these steps:
Power Cycle: Start by turning off the printer, unplugging it from the power source, and waiting for a few minutes. Then, plug it back in and turn it on again. Sometimes, a simple power cycle can clear temporary glitches.
Check for Obstructions: Ensure that there are no paper jams or any obstructions inside the printer that may be causing the error. Clear any paper jams carefully if you find any.
Reset Printer: Look for a reset button or a specific key combination in the printer's manual or documentation. Try resetting the printer to its default settings to see if the error clears.
Question edited to add English make and model.
Question moved from Cars and Trucks category.
English only on Fixya please. We are a North American website.
Reset maintenance minolta dialta di152.
Cruet of oil.
And this is the problem. Copiers have a 'cruet of oil'? And they do!
https://www.google.com/search?q=minolta+dialta+di152+oil+tank
..
If you have already replaced the charging corona, developer powder, and cleaned the laser unit, but the problem of a white light appearing on the artwork persists on your Konica Minolta Bizhub C454, here are a few additional steps you can take:
Check the transfer belt unit: Ensure that the transfer belt unit is clean and free from any debris or toner particles. You can gently wipe it with a clean, lint-free cloth. If the transfer belt is damaged or worn out, it may need to be replaced.
Inspect the imaging unit: Check the imaging unit (drum unit) for any signs of damage or wear. Make sure it is properly installed and securely seated in its designated position. If the imaging unit is defective, replacing it might resolve the issue.
Perform a density adjustment: The Bizhub C454 usually has a density adjustment function. You can access this in the device's settings menu or through the control panel. Performing a density adjustment might help improve the print quality and reduce any unwanted artifacts.
Check the print settings: Ensure that the print settings on your computer or the printer's control panel are appropriate for the artwork you are printing. Adjust the print quality, resolution, and any color settings as needed.
Update the firmware: Visit the Konica Minolta website and check if there are any firmware updates available for your Bizhub C454. Updating the firmware can sometimes address software-related issues that may be causing the white light problem.
If none of these steps resolve the issue, it is recommended to contact Konica Minolta's customer support or a certified technician for further assistance. They will have specialized knowledge and tools to diagnose and fix the specific problem with your machine.
The pickup rollers at the bypass tray may be dirty with paper dust and have lost their grippyness. Try cleaning them with a lint free cloth with a drop of washing up liquid. Wipe with a damp cloth and leave them to dry. Sometimes with age they can look perished and crack in which case or replace them if necessary.
Also the Bypass Tray has a little switch which tells the machine it is feeding from there. Make sure it is moving.
There are several reasons why your Konica Minolta C250i printer may be printing magenta as yellow. Here are some troubleshooting steps you can try:
Check the magenta toner cartridge: Make sure that the magenta toner cartridge is properly installed and has enough toner. If the toner cartridge is low or empty, replace it with a new one.
Clean the printer heads: Use the printer's cleaning function to clean the printer heads. This can help remove any clogs or buildup that may be preventing the magenta ink from flowing properly.
Check the printer settings: Check the printer settings to make sure that the correct paper type and color settings are selected. If the printer is set to print in grayscale or black and white mode, it may not use the magenta ink.
Perform a firmware update: Make sure that your printer has the latest firmware installed. Sometimes firmware updates can fix issues with printing quality.
Contact Konica Minolta support: If none of the above steps solve the issue, you may need to contact Konica Minolta support for further assistance. They may be able to diagnose the issue remotely or send a technician to your location.
If the red light is blinking on your Konica Bizhub 423, it usually indicates an error or issue with the printer. Here are a few things you can try to resolve the issue:
Check the display panel: The display panel on the printer should show an error message or code indicating what the issue is. Check the manual or contact Konica Minolta support to find out what the error code means.
Restart the printer: Try turning off the printer, unplugging it from the power source, waiting for a minute or so, and then plugging it back in and turning it on.
Check the toner: If the toner is low or empty, the printer may not function properly. Check the toner levels and replace the toner cartridge if necessary.
Check for paper jams: Paper jams can cause the printer to stop working. Check the printer for any stuck paper and remove it carefully.
If none of the above steps work, you may need to contact Konica Minolta support for further assistance.
Error code C-3151 on a Konica Minolta C8000 printer indicates a "Fixing Film Transport Motor Lock Problem." This error typically occurs when the flexing film is stuck or there is a problem in the film transport module. In order to fix the issue, the printer should be opened up and the fixing film should be checked for any obstructions. If the issue persists, the motor unit and flexing film may need to be replaced.
The function proceeds in the order of Physical Format to Logical Format.
• If the hard disk is yet to be formatted, the malfunction code "C-D010" will appear. Ignore this code and continue with the formatting procedure.
Use:
• When the hard disk is mounted.
• When the hard disk is to be initialized. (Physical Format to Logical Format)
Adjustment
Procedure
1. Call the Service Mode to the screen.
2. Touch these keys in this order: [State Confirmation] ? [Memory / HDD Adj.] ? [HDD
Format].
(1) Physical Format
1. Touch [Physical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
(2) Logical Format (Only when initial is set up)
1. Touch [Logical Format].
2. Press the Start key to start the formatting sequence.
3. The sequence will be automatically terminated as it is completed.
4. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
Error code P-28 on a Konica Minolta C654 printer indicates that there is a problem with the communication between the printer and the computer. This error can be caused by several different issues, here are a few possible solutions:
Check the cable connection between the printer and the computer. Make sure that the cable is securely connected and that there are no damages.
Check the printer driver on the computer. Make sure that the driver is up-to-date and installed correctly.
Restart the printer and the computer, and then try printing again.
If the issue still persists, try reinstalling the printer driver.
Try to connect the printer directly to the computer via a USB cable instead of a network connection, if it is possible, and see if it works.
In some cases, this error may be caused by a malfunctioning network card or control board. If none of the above solutions work, it is best to contact a technician or the manufacturer's technical support for further assistance. They will be able to provide more specific instructions for your specific model.
Note that these are general suggestions and your specific case may require different actions.
Regenerate response
The problem you are experiencing with your Konica Minolta Bizhub C280 not accepting new print jobs after changing the K drum and developer, could be caused by several reasons:
The new K drum and developer might not be compatible with the printer, please check if the new parts are compatible with your specific printer model.
The print queue on the computer may be stuck or corrupted. You can try clearing the print queue by going to the control panel and searching for "printers" and then right-clicking on the Bizhub C280 and selecting "See what's printing" and then "Cancel all documents"
The firmware of the printer may need to be updated, you can check the Konica Minolta website for any firmware updates for your specific model.
The 500,000 page count that you mentioned, could be a "life counter" on the printer, some printers have a maximum page count before needing maintenance, so it might be related to the issue.
The issue may also be related to the print server. You can try resetting the print server or reconfiguring it, or you can try connecting the printer directly to the computer and see if that resolves the issue.
Sometimes, resetting the network settings on the printer can also fix the problem. You can try going to the printer's web interface and find the network settings, and reset them to factory defaults.
It is highly recommended to consult the user manual or the technical support of Konica Minolta for specific instructions on how to perform these troubleshooting steps and avoid causing any further damage.
