Konica Minolta bizhub - Recent Questions, Troubleshooting & Support - Page 8
Bizhub 350 ask replace the toner while adding new toner bottle
Power off the machine. Then remove the toner bottle, be careful the hole might be on the bottom and the toner is going to go everywhere. Then close the toner cover and turn on the machine. Let the machine go through it normal routine. When it asks for toner install the toner bottle correctly. If THE KNUB on the side of the bottle is damage put a new one in. That KNUB is what the toner motor uses to turn the bottle, if it damaged you get a code. If that does not work, you might have a bad motor or the home sensor or actuator for the toner bottle is bad worse case the control board is bad
I have a Bizhub 361 has a error code c1102
FS-523 Finisher lift motor of the where the copies or prints come out the lift motor is shot!! or its not turning to lift the motor did the tray hit something on the way down or up???
Not finding what you are looking for?