Konica Minolta bizhub - Recent Questions, Troubleshooting & Support - Page 7

• Suction fan motor malfunction - The fan lock signal remains HIGH for a predetermined continuous period of time while the motor

Abnormally low toner density detected Black TCR Sensor.

• Fusing Warm-Up Failure (Main) - The Fusing Roller Thermistor does not detect the required temperature within 30 sec.

P-21: Color Regist Test Pattern Failure; Secondary Transfer Atvc Failure; P-22: Color Regist Adjust Failure

If the problem persists initialize the Fax board (Service Mode =>Fax =>Initialization

1. Has the developer been replaced along with the drum They are normally replaced as one. If not that is why it is coding out.

• 1.Failed Overall Control Board (OACB). 2.A communication issue between the CCD and OACB

• bizhub 6000 series machines record the DrumUnit's rotation speed. If you swapped drum unit

Go to service mode and clear the counter Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

go to service mode, press utility button from the panel, now press " stop, 0,0, stop, 0,1, it will show service mode, now select shipment, in this option, select "Maintenance Counter" now in this option select, 0 and press ok.

Low power code fuser not warm up properly

Press menu utility counter display keypad stop 0 0 stop 0 1 input password 9272927292729272 Press end press stop 0 clear then reset administration password

https://youtu.be/N4KwPUPuF7Q power off the machine pressed stop key then on machine error automatically clear error related low power

Pess utility printer setting print report and then print what you want

Self Help Product Support Konica Minolta Business Solutions Inc try this Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

First u need check your USB CABLE or USB connector is working or not

Abnormally high toner density detected cyan TCR sensor

to what????????????? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Scaner white alignment problem remove scanner glass and clean white tape