Konica Minolta bizhub - Recent Questions, Troubleshooting & Support - Page 6
My brand new machine Bizhub 211 have paper jam problem
COF32 means the ATDC sensor has detected some unusually high or low readings.
The ATDC sensor measure the toner lever inside the developer unit.
Try swithcing on/off, open/close the front door to clear the code.
If this doesn't work, you'll need an engineer to reset the ATDC level.
Good luck
Tam
Error code c0211 in bizhub c252
c0211 = Manual tray rise decent error - check PC14 lift up sensor, M2PC tray 2 vertical transport motor and also the tray 2 control board
RESET FUSER BIZHUB C360
Enter service mode -counter- parts couner-new release-select fuser-open front door-press start button. Exit technical mode. Good luck
I HAVE A BIZHUB 658E PRINTER,AND I GOT THIS ERROR CODE C-3B03 I'M WONDERING HOW TO FIX IT.
The fuser (The Hot Part) and the machine are not from the same region. For example: North America and Africa. Check where the machine is from and fuser came from.
Try this once if it does not work contact a KMBS Technician:
1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Reset key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.
If you do this to often you might cause a fire that will ruin a perfectly good day/ weekend!!!!!!!!!
Not finding what you are looking for?