Konica Minolta Computers & Internet - Recent Questions, Troubleshooting & Support

Hi dear, just click on this link and get your required driver full and free.

http://www.liutilities.com/device-driver/konica-minolta-7216/

Good Luck

The C 3502 error code in Konica Minolta c 6100, 1100, 1085, and 6085 machines is related to the fusing unit. The error code indicates that the fusing unit is not heating up correctly. There are several reasons why this error code might appear, including a malfunctioning thermistor, a broken fuser heater lamp, or a damaged fuser thermostat . A video: how to solve C 3501 3502 3503 3504 3505 3506 error in konica minolta 6500 6501 6000 7000 - YouTube Turn off the machine and unplug it from the power source. Remove the fusing unit from the machine. Check the thermistor and fuser heater lamp for any damage. Replace the damaged parts if necessary. Reinstall the fusing unit and turn on the machine. If the error code persists, it is recommended to contact a Konica Minolta service representative for further assistance

Question edited to toss in some CAPS. Not sure what you mean by 'on second fin'? Common issue https://www.google.com/search?q=Konica+Minolta+Bizhub+C364E+Stuck+booting+up ..

We are FIXYA, we aren't Konica Support. We just have a Konica Minolta section for handy sorting of questions. Firmware and Support are in this link. Contact them direct via phone, email or chat options. https://www.google.com/search?q=konica+minolta+c6501+firmware+download ..

My printer drypro model 832 is giving me an error 4122 what should i do the hospital is stuck,my email address is [email protected] please help.

Question edited for clarity. Question moved from MISC. lots of videos and info, https://www.google.com/search?q=Konica+Minolta+Bizhub+C252+-+Copier.+It+displays+a+message+%27replace+fuser+unit%27+and+%27replace+transfer+unit%27. ..

This could be related to your browser. One way to find out is to try the page on a different browser. Some other options are Firefox and Chrome. If it works on a different browser and you would like to continue using your original browser then you could try and clear the cache on the browser and try again. Which browser are you using and have you tried a different one? Let us know and I hope it works for you soon.

Abnormality in the black charging unit. Possible causes: Black charging unit HV Unit Print Control Board My best guess is that you have a faulty charge unit. Try swapping the units around with another colour and see if the fault code shifts.

I searched the internet using https://www.google.com and found the following result, that may require a technician to resolve: https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20C368&code=C5360

Code

C5360

Description

Clean unit fan failure to turn (When CU-101 is installed). The fan lock signal remains HIGH for a predetermined continuous period of time while the fan is turning.

Causes

• Exhaust fan/1 (FM14) • Exhaust fan/2 (FM15) • Suction fan (FM16) • Clean unit drive board (CUDB) • MFP board (MFPB)

Remedy

1. Check the connector between CUDB CN1-MFPB CN32E for proper connection and correct as necessary. 2. Check the connector between FM14-CUDB CN3, FM15-CUDB CN2, FM16-relay CN183-CUDB CN4 for proper connection and correct as necessary. 3. Check the fan for possible overload and correct as necessary. 4. FM14, FM15, FM16 operation check • Load check: Check code42, Multi code 4 • Control signal: CUDB CN3 (FM14), CUDB CN2 (FM15), CUDB CN4 (FM16) • Location of electrical component: 14-X 5. Replace the defective fan. (FM14 / FM15 / FM16) 6. Replace CUDB. 7. MFPB ICP14E conduction check 8. Replace MFPB.

Most likely you received this message after a toner was replaced. Reseat the cartridge and restart the printer. If that doesn't work remove all of the toner cartridges manually and reinstall. Turn off the printer and open the top cover. Follow the toner cartridge all the way to the right side of the printer (on the white part). You should see a hole that looks like a cross. Take a pen or key and push down on the black button in that hole. While you are holding it down rotate the toner cartridge towards you. You want to get the colored roller on the cartridge about 1/2in away from the metal bar that says "consumable reorder". You should be in a position to take out the toner. Let go of the hole and remove the cartridge. Repeat the steps until all of the cartridges have been removed. Turn the printer back on at this point. You are going to get toner not installed messages on the printer. Open the top cover and the cyan tray will be in place. Shake the toner and install. Close the cover and let it cycle to the next color (black). Repeat the process until all cartridges are installed. If you are still getting the error you either have a bad cartridge or the carousel that the toners sit in is damaged.

konica monalta c70hc error code c0101

Hi, Try this: https://printcopy.info/?l=en&mod=erc&brand=Konica-Minolta&model=bizhub%20C10&code=17H It didn't make much sense to me, but it's not my area of expertise.! Best of luck.

Kindly tell me what is the problem you are facing in Konica Minolta bizhub 421 MFP?