Kodak Photography - Recent Questions, Troubleshooting & Support

Question edited for full 'make model what it is' and correct model name Ektasound, no ' r '. If you have a good camera shop in your nearest city, they will know an old school projector repairer. https://www.google.com/search?q=Kodak+Ektasound+275+repairs .. 235 that eats film

I have no idea if this would work but worth a try...put a twist in the belt when replacing it.

I had this problem - The problem is the way that the file was encoded after editing in photoshop. When saving it as a JPEG you must make sure that the format options are set to either Baseline "standard" or Baseline "Optimized". If the format settings are set as Progressive you will get the error "current file is bad blah blah blah"
Hope this helps.

To the best of my knowledge all 35mm cameras load identically, apart from a few automatic models that claimed to be self loading. A new film cassette has a tongue of film protruding. Once the cassette has been loaded into the recess on the left and the rewind crank pushed down and engaged with the film spool, a couple of inches of film is pulled from the cassette and the tongue poked through the slot in the takeup spool - it might be necessary to use the film advance until the slot is visible. With about a half-inch of film pushed through the slot, slowly advance the film until the slackness is gone while fully engaging the sprocket holes at the edges of the film on the teeth of the sprockets. Advance the film a little more to check it is properly engaged and once you are satisfied close the camera back firmly making certain the catch is engaged and it won't spring open again. Once closed, advance the film until it stops which signals the shutter is set and is ready to take a photograph, however the first and perhaps the second frame has been contaminated with light and so press the shutter release, advance and press again and the third advance is where the photographs begin. If there is a frame counter it is best to be guided by this. Cameras that have a manual advance usually have a manual return crank that will be seen to rotate as the film is advanced. When all the frames have been used the film will be felt to come to the end. At this point the clutch button must be pressed to disengage the wind-on mechanism and the film wound back into the cassette using the crank on the left.

Make sure that you have the correct video format and compression. Video:
File Format: MOV
Video Compression: MPEG-4 ASP, MJPEG
Audio Compression: MP3, G.711, PCM, ADPCM, 8-bit linear

File Format: AVI
Video Compression: MPEG-4 ASP, MJPEG
Audio Compression: MP3, G.711, PCM, ADPCM, 8-bit linear

File Format: MPG / MPEG
Video Compression: MPEG-1
Audio Compression: MPEG audio Picture:
File Format: JPG / JPEG
Video Compression: Baseline JPEG

Music:
File Format: MP3
Video Compression: PCM, ADPCM, MPEG 1 layer 1,2,3
You will need to re-edit the video files you have for the frame to recognize it.

Check in the manual to see if a) that size card is compatible, and b) if the images are in the correct format.

vas te fair foutre

Euro to Dollar Chart

Just reload the pictures from your backup

Again, most kind of you to pass on this information. Was there any particular reason behind your doing so ?

If you are disabled, and use a walking frame, you should be able to get assistance from the Social Services department of your local council

Replace it - you have successfully damaged it beyond economic repair.

From information written in the film slot: "Kodak PR10 Film"

Sorry these types of items are not serviced. My suggestion is to make one.

I'm having the same problem so I'm trying to re register it but need the activation cade since I don't have the box anymore and it won't come up on screen

Peyton Helou peytonhelou Instagram photos and videos

You must take pictures and transfer them to a memory card using a computer. Here is a link to the manual: http://resources.kodak.com/support/pdf/en/manuals/urg00722/Digital_Frames_UG_GLB_en.pdf