Kodak ESP - Recent Questions, Troubleshooting & Support
Printer error error code 3807
From the kodak website:
Error "System status failed" (3807)
How do I resolve the error message "System status failed" (error code 3807)?
To resolve the error message "System status failed" (error code 3807):
Disconnect the power adapter from the printer.
Wait 30 seconds to allow the printer to reset.
Connect the power adapter to the printer. Turn the printer on if necessary
If the error continues:
Open the printer access door.
Remove and install the printhead two times.
Close the printer access door.
Wait until the printer is ready to use.
If the error is resolved, upgrade your printer's firmware.
If the error is not resolved, contact kodak.
Hope this helps
My kodak 5250 printer won't connect to my wireless
The most basic reason you can't connect Kodak printer to your wireless network is that it's not set up correctly. So the first thing we are going to try is to follow the official setup wizard to connect the Kodak Printer to your Wireless network. If You need Instant Help then Dial Our
Printer Support Number 817 442 6637 or follow these steps:
Method - 1: Connect Kodak Printer Online using the Wi-Fi Setup Wizard
·Press the Home button on your Kodak printer.
·Head over to the Network Settings using the right arrow key.
·Here you will find the WiFi Setup Utility. Click on it. Note that when you select the Wi-Fi Setup Utility, it automatically turns on the Wi-Fi radio. So check if it's turned on or not.
·You will get a screen showing all available wireless networks. You can browse through them using the up and down arrows. First, select the network name that you wish to connect to.
·If your network name is not visible, then select the Re-scan option to force the printer to search for your wireless network again. If it still can't find it, check to see if the WiFi router is turned on, whether it's placed physically close to the printer, or the network name (SSID) is set to visible. Also, check if you enabled IP Address filtering on your router for security reasons. If so, add the printer IP address to it.
·Once you see your wireless network, connect to it. The printer will require you to select a user password. You can do this using the onscreen keyboard, and remember it's case-sensitive.
·After configuring your new network password, click OK.
·Next, a confirmation message will show up on the screen. Click Next, and your printer should be successfully connected to your WiFi network. To confirm this yourself, look at the Wi-Fi connectivity LED. It should stop blinking and remain lit.
·And that's it - you should have successfully connected your Kodak printer to your WiFi network. But in case you are still facing issues, try the following method.
Method - 2: Connect Kodak Printer Using WPS
·WPS is short for Wi-Fi Protected Setup and is a feature that allows for a one-touch connection between your wireless router and other devices. Here's a quick guide on how to use WPS to connect to your Kodak Printer.
·Like before, press the Home button, go to Network Settings, and click Wi-Fi Setup Wizard. But this time, click on WPS Connect.
·Now press the WPS button on your wireless router. There should be a physical button on it, or you can click on a virtual switch in the device's software.
·Next, select the Push Button Configuration option on your Printer and choose the WPS option for your wireless router.
·Press OK on the control panel. Now you should notice your SSID or network name displayed on the list of available wireless networks on your printer.
·Tap the SSID for your Wi-Fi network and enter your password to connect to it.
·Similar to before, check the WiFi connectivity LED to confirm that the connection is stable and active. And that's it! Congratulation, you have successfully set up your Kodak printer to work with your Wi-Fi network. You should now be able to take printouts wireless.
But if you still face issues, Then Dial Our Helpline number 817 442 6637
Kodak esp 5 won't scan to computer...please note spammers number below
Here is the solution I found on the Kodak ESP 5 Support Center web page. Hope it helps or else maybe just visit the web page and browse it to see if you can find the solution to your specific problem.
Question
:
How do I scan from my all-in-one printer using MICROSOFT WINDOWS
Imaging Acquisition (WIA) Drivers on a computer running WINDOWS VISTA
Operating System?
Answer
:
For computers running WINDOWS VISTA Operating System:
- Click Start > Programs/All Programs, and select Windows Photo Gallery.
- Click Scan at the bottom of the Windows Photo Gallery window, then click New Scan at the top of the window.
- Select KODAK ???? AiO (where ???? is the model number) from the Select Device window, then click OK.
- Click Preview and make whatever adjustments needed to achieve the desired scan.
- When you have made the desired adjustments, click Scan.
During scanning, the progress is displayed.
When the scan is complete, the file is displayed in the Windows Fax and Scan window, along with a preview of the file.
- Click Save as... to save the file, or click the Print icon to print the file from the Windows Fax and Scan application.
Printhead Error 3802
3802 Mean Printhead Failuer
All You need to do is turn the printer Off and On
And if the problem still there
Remove the ink cartridges and the printhead
And if the problem still there
Do it that again for (5x)
And if the problem still there
Tell this to kodak support
And tell the troubleshooting steps you did.
My printer is printing like a reverse negative. please note spam number below
On many printers (i can't speak specifically to yours) there is a "negative" setting.
All I can suggest is to browse through your printer properties:
"Start"
"Control panel"
"Printers and faxes"
"right click" the printer icon"
Then "left click" on "properties"
Then browse in your "printing preferences" though all of the buttons and you will likely find a "negative" setting or something similar. then deselect it.
I hope this helps.
Printer not activated, error code - 20
You may face the "
Error code-20′ with your printer installed in your Windows 7. The cause of the display of "Error code-20′ may be due to the following reasons. The desired printer may not be the default printer for your prints, issues with the USB composite device, and file missing or file corruption with the printer software supplied by your original equipment manufacturer.
My Kodak ESP 3250 won't
Try initiating the scan from the computer, once you plug in the USB cable into your computer, go to My Computer, right click the sanner (should be called something along the lines of KODAK ESP.....) and press scan, then click which program you'll use to scan it, I usually do the Microsoft one, Good luck!!
How to clean print heads on kodak esp-3
Press and hold Cancel and Copy button simultaneously until the
On/Off light flashes green. you will see a flashing green on your printer it means its now cleaning the printhead
You can also clean a printhead using computer., first you need to launch the Home center software On your computer and on the uppr right corner of the windows of the software click help icon(?) then go to maintenance and under maintenance you should see the clean printhead. GudlucK!
I tried to insert my
yes what kind of camera u have if u have a usb plug in the front you can buy an adapter for your camera at staples or your local electronics store..
Kodak printer will not print
Hi , i have been using avery templates and label paper at work for ages and always printed off without problems on my lexmark . I bought a Kodak however and all of a sudden I could no longer print off my labels , when I put paper in it just came out blank and said paper wrong size .I could not find any solutions at all and was tearing my hair out . I just kept trying different things and all of a sudden I changed a setting and it worked perfectly.When you go to print your label change the ' scale to paper size ' function to A4 and then it will print.hope this helps
Paper wont feed
support.en.
kodak.com/.../
paper-not-
feeding-in-
all-in-
one-
printer
KodakPaper not feeding in all-in-one printer. Published 10/19/2010 04:38 PM ' Updated 09/23/2014 01:38 PM ' Answer ID 19640. What should I do if the paper does ...
resources.
kodak.com/support/shtml/en/manuals/.../urg01238c11s1.shtml
KODAK ESP Office 2100 Series All-in-One Printers - Extended User Guide ... If you experience an error with your printer, restarting your printer will ... For wireless connectivity issues, go to www.kodak.com/go/inkjetnetworking. Carriage ... If thepaper is not stacking properly in the output tray, remove the pages as they exit.
? 20:50
https://www.youtube.com/watch?v=jpkitdHmkuc
Aug 15, 2014 - Uploaded by Sabretooth Barnacle
This is probably a common issue amongst all Kodak Printers. ...thanks for the video, these same instructions worked on theKodak 2150! ... What do you thinkthe pproblem is, Kodak offered me another one for ... the printer realises they don't match so rejects the paper until you feed in the size it's expecting.
Not finding what you are looking for?