HP OfficeJet - Recent Questions, Troubleshooting & Support - Page 9
Officejet 6500 color balance
On HP 6500 printers, remove screen and try heating the connection elemants with hair dryer or something similar. Nothing to hot. The led bars should restore. Here's a link on how to remove HP 6500. Do same for 6500A model, but screen is a bit different, so check out the other video for HP 6500A and 6500A plus printers: HP 6500:
New ink only prints pink and black?
Try soaking printhead in the cleaning solution and it will resolve the issue. Check out the video on how to repmve printhead below. Put it in about half inch of solution which is 50% water, 40% window clening solution like windex, and some ammonia or rubbing alcohol.
Hp officejet pro L7590 - automatic document feeder
Hi
Check the following
--Check the paper in the ADF
(automatic document feeder)--Make sure the ADF pick assembly is in good working condition
--Remove the document feeder and open the ADF cover.
--While lifting the blue-green lever, carefully rotate the pick assembly toward the open ADF cover until it stops.
--Make sure the bottom roller is held firmly in place by the two-catch, which is located to the left and the right of the roller.
--Clean the rollers and separator pad
0x61011beb ink system failure on
1. Plug it directly into the wall, rather than into a UPS
2.
Verify that the unit is switched on. Disconnect the USB/Ethernet cable
from the All-in-One and also disconnect power cable from All-in-One and
also from wall outlet.
3. Wait 30 seconds.
4. Plug in the power cable to All-in-One and also to wall outlet.
5. Check for the functionality.
I still had the error message, so they said to reset the printer to factory default settings:
1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.
2. Then, press and hold # and 6 while plugging in the power cord.
Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.
If those two steps do not resolve the problem then its is hardware related and can't be solved here.
0x61011beb
Try this. It worked for me a few times:
HP Officejet Pro 8600 vertical lines on all copies
I had the same problem; it happened with the first copy I tried to make directly from the printer's console - but only with the Black ink function - with the same original on the flatbed glass I then tried the Color function and it worked fine. But when I tried the Black copy function, the strong vertical lines appeared again - about 7, evenly spaced across the page and running the entire length of the page.
Nothing about cleaning any part made sense: the printer was brand new, out of the box, the color ink function worked fine to copy; so did making scan copies. It was only the black ink mode in the copy function with the original on the flatbed glass that produced the vertical lines.
What cleared it up was shutting it down, removing and re-inserting the power cord the other way, i.e., turning it around (which might have nothing to do with the outcome) and Voila! - no vertical lines with the black ink copy function - Go figure...
Error code 0005FBB6
-
Turn on the HP All-in-One.
-
Disconnect the power cord from the back of the unit.
-
Press and hold the # and 3 buttons simultaneously.
-
While still holding down the # and 3 buttons, connect the power cord to the back of the unit.
-
Continue holding the buttons until the Power button blinks.
-
Follow the instructions that display on the unit to select the language settings.
Then when that's done, try printing, or copying items. If its still not working, check the ink and change those out and this should fix it.
Cloud Striver
If you have further questions email
[email protected]
Not finding what you are looking for?